Komatsu HOLDER 23A-70-71130 HOLDER	Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; d:12; Accessory:No Cover; Fit:J7; Basic Load Rating, Static Rating(N):6650; Surface Treatment:No; Diameter series symbol:Used for Light load; Machining:Oil-free type; Rolling Element Material:Bearing Steel;
Komatsu HOLDER 793-415-1120 HOLDER	d:30.16 mm; s1:15 mm; L:80 mm; T min.:-20 °C; A:31 mm; B:30 mm; Designation of bearing:US206-19G2T20; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; Weight:0.85 kg;
Komatsu HOLDER BT415105050 HOLDER	Bearing Material:Steel; Number of Bearings:Double; Holder Width(inch):2-3/4; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6005; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Retained:No;
Komatsu HOLDER 235-70-45320 HOLDER	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;
Komatsu HOLDER 17A-30-48412 HOLDER	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;
Komatsu HOLDER 45B-ARS-1460UKKF 9HOLDER	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;
Komatsu HOLDER KD7-23750-0064 BRUSH HOLDER AS	Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; d:12; Accessory:No Cover; Fit:J7; Basic Load Rating, Static Rating(N):6650; Surface Treatment:No; Diameter series symbol:Used for Light load; Machining:Oil-free type; Rolling Element Material:Bearing Steel;
Komatsu HOLDER MFP0000814 HOLDER	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;