| Komatsu HOLDER 418-22-32960 HOLDER | Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-; |
| Komatsu HOLDER 14X-27-51330 HOLDER | Number of Bearings:Single; Lateral Width L(mm):160; Bearing I.D. d(mm):40; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Height H(mm):50 ～ 100; C Chamfered:Not Provided; Width T(mm):27; Bearing Part Number:6208; Days to Ship:8 Days; |
| Komatsu HOLDER 11Y-69-22290 DRAWBAR ASS'Y | Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm; |
| Komatsu HOLDER 6735-13-3090 NOZZLE HOLDER K | Number of Bearings:Single; Lateral Width L(mm):160; Bearing I.D. d(mm):40; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Height H(mm):50 ～ 100; C Chamfered:Not Provided; Width T(mm):27; Bearing Part Number:6208; Days to Ship:8 Days; |
| Komatsu HOLDER 14X-43-12251 HOLDER | Min operating temperature, Tmin:-20 °C; C0r:29.1 kN; G1:19 mm; C1:0.8 mm; Characteristic rolling element frequency, BSF:6.22 Hz; G:M18X1.5; C:20 mm; d1:18 mm; Maximum tightening torque:76 Nm; Max operating temperature, Tmax:120 °C; |
| Komatsu HOLDER ND126000-2320KF BRUSH HOLDER AS | Bearing Material:Steel; Number of Bearings:Double; Holder Width(inch):2-3/4; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6005; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Retained:No; |
| Komatsu HOLDER 6736-13-3080 NOZZLE HOLDER K | Min operating temperature, Tmin:-20 °C; C0r:29.1 kN; G1:19 mm; C1:0.8 mm; Characteristic rolling element frequency, BSF:6.22 Hz; G:M18X1.5; C:20 mm; d1:18 mm; Maximum tightening torque:76 Nm; Max operating temperature, Tmax:120 °C; |
| Komatsu HOLDER 262-70-75410 HOLDER | Min operating temperature, Tmin:-20 °C; C0r:29.1 kN; G1:19 mm; C1:0.8 mm; Characteristic rolling element frequency, BSF:6.22 Hz; G:M18X1.5; C:20 mm; d1:18 mm; Maximum tightening torque:76 Nm; Max operating temperature, Tmax:120 °C; |