Komatsu HOLDER KD7-23750-0064 BRUSH HOLDER AS	d:30.16 mm; s1:15 mm; L:80 mm; T min.:-20 °C; A:31 mm; B:30 mm; Designation of bearing:US206-19G2T20; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; Weight:0.85 kg;
Komatsu HOLDER 21W-70-48272 HOLDER	s1:64.3 mm; Designation of bearing:EX216G2L3; A1:55 mm; T min.:-20 °C; B1:95.2 mm; Designation of housing:PE216-; Recommended tightening torque for set screw:33 Nm; d1:110 mm; H:89 mm; C0:54.2 kN;
Komatsu HOLDER 196-72-11260 HOLDER	Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; d:12; Accessory:No Cover; Fit:J7; Basic Load Rating, Static Rating(N):6650; Surface Treatment:No; Diameter series symbol:Used for Light load; Machining:Oil-free type; Rolling Element Material:Bearing Steel;
Komatsu HOLDER 417-06-23410 HOLDER	Ca - Axial Load Rating:11780 lbf; Dimension H:4.9 in; Cr - Dynamic Load Rating:164111 lbf; Maximum Speed:1320 rpm; Series Type:Medium Series; Note:This product line wa; Dimension N:15.500 in; Dimension R:18.3 in; Dimension P:1.0 in; Bearing - Housing - Seal:MSE511BRHRSS;
Komatsu HOLDER 6207-11-3110 HOLDER ASS'Y	s1:64.3 mm; Designation of bearing:EX216G2L3; A1:55 mm; T min.:-20 °C; B1:95.2 mm; Designation of housing:PE216-; Recommended tightening torque for set screw:33 Nm; d1:110 mm; H:89 mm; C0:54.2 kN;
Komatsu HOLDER 235-70-14190 HOLDER	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;
Komatsu HOLDER 21W-70-48272 HOLDER	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;
Komatsu HOLDER MFP0000814 HOLDER	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;