Komatsu HOLDER 11Y-30-44550 HOLDER	G1 - Heat Generation Factor (Roller-Raceway)7:2500; r - Cup Frontface To Clear Radius2:0.130 in; C - Double Cup Width:6.8750 in; Da - Cup Frontface Backing Diameter:23.11 in; Y1 - ISO Factor5:0.72; D:24.5000 in; Cg - Geometry Factor8:0.24; Series:H961600; K - Factor3:0.62; Y - ISO Factor1:0.64;
Komatsu HOLDER BT41511505D HOLDER ASS'Y	d:30.16 mm; s1:15 mm; L:80 mm; T min.:-20 °C; A:31 mm; B:30 mm; Designation of bearing:US206-19G2T20; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; Weight:0.85 kg;
Komatsu HOLDER DK105041-7130 HOLDER ASS'Y	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;
Komatsu HOLDER 6211-12-3210 HOLDER ASS'Y	Number of Bearings:Single; Lateral Width L(mm):160; Bearing I.D. d(mm):40; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Height H(mm):50 ～ 100; C Chamfered:Not Provided; Width T(mm):27; Bearing Part Number:6208; Days to Ship:8 Days;
Komatsu HOLDER 262-70-75140 HOLDER	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;
Komatsu HOLDER 11Y-69-22290 DRAWBAR ASS'Y	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;
Komatsu HOLDER 711-73-21740 HOLDER	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;
Komatsu HOLDER 195-43-45762 HOLDER	T min.:-20 °C; A1:27 mm; Recommended tightening torque for set screw:8 Nm; H:47.6 mm; Dz:80 mm; E:20 mm; A:48 mm; T max.:100 °C; d:33.34 mm; H1:13 mm;