| Komatsu CHAIN ASS'Y 37F-739-7390KF CHAIN 1 | d1:44.5 mm; Mass:0.26 kg; Db min:58.5 mm; ra max:1.5 mm; Da min:45.5 mm; da max:34 mm; B:17 mm; Y2:0.73; Characteristic inner ring frequency, BPFI:8.7 Hz; d:25 mm; |
| Komatsu CHAIN ASS'Y 37G-9BA-2500KF CHAIN ASS'Y | C - Cup Width:82.550 mm; d:381.000 mm; Cg - Geometry Factor:0.212; C90 - Dynamic Radial Rating (90 million revolutions)4:145000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:82300 lbf; G1 - Heat Generation Factor (Roller-Raceway):4383.4; C0 - Static Radial Rating:946000 lbf; B - Cone Width:104.775 mm; D:546.100 mm; Cage Type:Stamped Steel; |
| Komatsu CHAIN ASS'Y 3RA-34-00100KF ACTUATOR ASS'Y 1 | Y2:4.23; Static load, C0:124 kN; Radial clearance class:CN; Da max:83 mm; d2:59.5 mm; Max operating temperature, Tmax:200 °C; Associated sleeve reference:H310; Dynamic load, C:130 kN; e:0.24; Fatigue limit load, Cu:14.5 kN; |
| Komatsu CHAIN ASS'Y 37B-9CB-2301KF CHAIN ASS'Y | A1:34 mm; s1:25.8 mm; C0:23.2 kN; Designation of bearing:UC210-30G2; N:M16; S:19 mm; J:101.6 mm; d:47.62 mm; E:20 mm; A:54 mm; |
| Komatsu CHAIN ASS'Y 37B-9CA-2530KF CHAIN ASS'Y | Nlim (grease):3,800 rpm; f0:14.3; Min operating temperature, Tmin:-25 °C; Static load, C0:36 kN; Radial clearance class:CM; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; ra max:1.5 mm; Characteristic outer ring frequency, BPF0:4.08 Hz; Mass:0.78 kg; |
| Komatsu CHAIN ASS'Y 37B-9CA-2560KF CHAIN ASS'Y | d1:44.5 mm; Mass:0.26 kg; Db min:58.5 mm; ra max:1.5 mm; Da min:45.5 mm; da max:34 mm; B:17 mm; Y2:0.73; Characteristic inner ring frequency, BPFI:8.7 Hz; d:25 mm; |
| Komatsu CHAIN ASS'Y 37C-7CZ-3450KF CHAIN ASS'Y | Nlim (grease):3,800 rpm; f0:14.3; Min operating temperature, Tmin:-25 °C; Static load, C0:36 kN; Radial clearance class:CM; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; ra max:1.5 mm; Characteristic outer ring frequency, BPF0:4.08 Hz; Mass:0.78 kg; |
| Komatsu CHAIN ASS'Y 37B-9CD-2470KF CHAIN ASS'Y | Number of Bearings:Double; Flange O.D. H(φ):44; Shape:Flanged Pilot Type; Type:Bearings with Housin; Holder Surface Treatment:Clear Anodize; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Housing Material:[Aluminum Alloy] 201; |