| Komatsu CHAIN ASS'Y GJ1171885 ACTUATOR | A1:34 mm; s1:25.8 mm; C0:23.2 kN; Designation of bearing:UC210-30G2; N:M16; S:19 mm; J:101.6 mm; d:47.62 mm; E:20 mm; A:54 mm; |
| Komatsu CHAIN ASS'Y 37B-9CA-2690KF CHAIN ASS'Y | Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Type:Bearings with Housin; Bearing I.D. d(mm):3; Shape:Flanged Pilot Type; Flange Shape:Round Type; Holder Surface Treatment:Electroless Nickel P; |
| Komatsu CHAIN ASS'Y 37B-9CC-2520KF CHAIN ASS'Y | Nlim (grease):3,800 rpm; f0:14.3; Min operating temperature, Tmin:-25 °C; Static load, C0:36 kN; Radial clearance class:CM; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; ra max:1.5 mm; Characteristic outer ring frequency, BPF0:4.08 Hz; Mass:0.78 kg; |
| Komatsu CHAIN ASS'Y 37B-9CD-2550KF CHAIN ASS'Y | Y2:4.23; Static load, C0:124 kN; Radial clearance class:CN; Da max:83 mm; d2:59.5 mm; Max operating temperature, Tmax:200 °C; Associated sleeve reference:H310; Dynamic load, C:130 kN; e:0.24; Fatigue limit load, Cu:14.5 kN; |
| Komatsu CHAIN ASS'Y 8293-54-3460 CHAIN ASS'Y | d1:44.5 mm; Mass:0.26 kg; Db min:58.5 mm; ra max:1.5 mm; Da min:45.5 mm; da max:34 mm; B:17 mm; Y2:0.73; Characteristic inner ring frequency, BPFI:8.7 Hz; d:25 mm; |
| Komatsu CHAIN ASS'Y 37B-9CB-2571KF CHAIN ASS'Y | T min.:-40 °C; L:68 mm; S:7.5 mm; T max.:100 °C; H:125 mm; L1:65 mm; e:16 mm; Recommended tightening torque for set screw:3.7 Nm; A1:14 mm; J1:51 mm; |
| Komatsu CHAIN ASS'Y 37B-9CB-2470KF CHAIN ASS'Y | Nlim (grease):3,800 rpm; f0:14.3; Min operating temperature, Tmin:-25 °C; Static load, C0:36 kN; Radial clearance class:CM; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; ra max:1.5 mm; Characteristic outer ring frequency, BPF0:4.08 Hz; Mass:0.78 kg; |
| Komatsu CHAIN ASS'Y DK159580-0922 ACTUATOR | Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Type:Bearings with Housin; Bearing I.D. d(mm):3; Shape:Flanged Pilot Type; Flange Shape:Round Type; Holder Surface Treatment:Electroless Nickel P; |