| Komatsu CHAIN ASS'Y 3RA-34-62021UNKF 9ACTUATOR ASS' | T min.:-40 °C; L:68 mm; S:7.5 mm; T max.:100 °C; H:125 mm; L1:65 mm; e:16 mm; Recommended tightening torque for set screw:3.7 Nm; A1:14 mm; J1:51 mm; |
| Komatsu CHAIN ASS'Y 37B-9CA-2480KF CHAIN ASS'Y | T min.:-40 °C; L:68 mm; S:7.5 mm; T max.:100 °C; H:125 mm; L1:65 mm; e:16 mm; Recommended tightening torque for set screw:3.7 Nm; A1:14 mm; J1:51 mm; |
| Komatsu CHAIN ASS'Y 37B-9CB-2411KF CHAIN ASS'Y | d1:44.5 mm; Mass:0.26 kg; Db min:58.5 mm; ra max:1.5 mm; Da min:45.5 mm; da max:34 mm; B:17 mm; Y2:0.73; Characteristic inner ring frequency, BPFI:8.7 Hz; d:25 mm; |
| Komatsu CHAIN ASS'Y 37B-9CA-2490KF CHAIN ASS'Y | Bearing UPC:013992059437; Bearing - Housing - Seal:LSE607BXH; Cor - Static Load Rating:178049 lbf; Dimension N:13.875 in; Bearing Type:Split Cylindrical Ex; Cr - Dynamic Load Rating:131064 lbf; Bolt Size:4 x M24; Seal Type:Felt Seal; Dimension V:0.1 in; Shaft Size:6-7/16 in; |
| Komatsu CHAIN ASS'Y 37B-9CB-2450KF CHAIN ASS'Y | Width T(mm):14; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):10; Shape:Flange Type; RoHS:6; Volume Discount:Available; Bearing Material:[Steel] Steel; Bearing Part Number:6200; Number of Bearings:Single; |
| Komatsu CHAIN ASS'Y 37F-739-7430KF CHAIN 2 | Size Standards:Metric System; Retainer Type:Resin Forming; Basic Dynamic Load Rating(N):41500; Holder Symbol:TYN; Seal, Shield Symbols:No; Outer Ring:With Outer Ring; Preload:Normal preload; Preload Mark:No; Bearing type symbol:No; Type:Angular Contact Ball; |
| Komatsu CHAIN ASS'Y 37B-9CC-2520KF CHAIN ASS'Y | Nlim (grease):3,800 rpm; f0:14.3; Min operating temperature, Tmin:-25 °C; Static load, C0:36 kN; Radial clearance class:CM; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; ra max:1.5 mm; Characteristic outer ring frequency, BPF0:4.08 Hz; Mass:0.78 kg; |
| Komatsu CHAIN ASS'Y 37C-7BZ-1700KF CHAIN ASS'Y | Y2:4.23; Static load, C0:124 kN; Radial clearance class:CN; Da max:83 mm; d2:59.5 mm; Max operating temperature, Tmax:200 °C; Associated sleeve reference:H310; Dynamic load, C:130 kN; e:0.24; Fatigue limit load, Cu:14.5 kN; |