| Komatsu CHAIN ASS'Y 37F-739-1390KF CHAIN 1 | Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Type:Bearings with Housin; Bearing I.D. d(mm):3; Shape:Flanged Pilot Type; Flange Shape:Round Type; Holder Surface Treatment:Electroless Nickel P; |
| Komatsu CHAIN ASS'Y 37C-7CZ-3650KF CHAIN ASS'Y | T min.:-40 °C; L:68 mm; S:7.5 mm; T max.:100 °C; H:125 mm; L1:65 mm; e:16 mm; Recommended tightening torque for set screw:3.7 Nm; A1:14 mm; J1:51 mm; |
| Komatsu CHAIN ASS'Y 37C-9CB-1340KF CHAIN ASS'Y | Nlim (grease):3,800 rpm; f0:14.3; Min operating temperature, Tmin:-25 °C; Static load, C0:36 kN; Radial clearance class:CM; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; ra max:1.5 mm; Characteristic outer ring frequency, BPF0:4.08 Hz; Mass:0.78 kg; |
| Komatsu CHAIN ASS'Y 37G-9BA-2300KF CHAIN ASS'Y | Y2:4.23; Static load, C0:124 kN; Radial clearance class:CN; Da max:83 mm; d2:59.5 mm; Max operating temperature, Tmax:200 °C; Associated sleeve reference:H310; Dynamic load, C:130 kN; e:0.24; Fatigue limit load, Cu:14.5 kN; |
| Komatsu CHAIN ASS'Y 37C-7CZ-3450KF CHAIN ASS'Y | Nlim (grease):3,800 rpm; f0:14.3; Min operating temperature, Tmin:-25 °C; Static load, C0:36 kN; Radial clearance class:CM; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; ra max:1.5 mm; Characteristic outer ring frequency, BPF0:4.08 Hz; Mass:0.78 kg; |
| Komatsu CHAIN ASS'Y 3RA-34-62021UNKF 9ACTUATOR ASS' | T min.:-40 °C; L:68 mm; S:7.5 mm; T max.:100 °C; H:125 mm; L1:65 mm; e:16 mm; Recommended tightening torque for set screw:3.7 Nm; A1:14 mm; J1:51 mm; |
| Komatsu CHAIN ASS'Y 37B-9CA-2530KF CHAIN ASS'Y | Bearing UPC:013992059437; Bearing - Housing - Seal:LSE607BXH; Cor - Static Load Rating:178049 lbf; Dimension N:13.875 in; Bearing Type:Split Cylindrical Ex; Cr - Dynamic Load Rating:131064 lbf; Bolt Size:4 x M24; Seal Type:Felt Seal; Dimension V:0.1 in; Shaft Size:6-7/16 in; |
| Komatsu CHAIN ASS'Y 37B-9CA-2690KF CHAIN ASS'Y | Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Type:Bearings with Housin; Bearing I.D. d(mm):3; Shape:Flanged Pilot Type; Flange Shape:Round Type; Holder Surface Treatment:Electroless Nickel P; |