Komatsu KIT YM729430-92605 GASKET KIT	Inner/Outer Ring Material:Steel; Rotational Speed(rpm):2560; Rolling Element Material:Steel; Specifications:Standard; Size Standards:Metric System; Holder Symbol:W; Number of Raceway Ring Rows:Single Row; Basic Load Rating, Static Rating(N):265000; Low Torque Specification:No;
Komatsu KIT 721-98-00260 SEAL KIT	Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):52400; Unit Body Material:Cast Iron; Bearing Unit, Type:Diamond Flange Shape; Diameter series symbol:Used for Light load; Surface Treatment:No; Grease Type:Standard Grease; Bearing Inner Dia. Shape:Cylindrical Bore Set; d:60; Stroke:No;
Komatsu KIT 6204-K1-9901 GASKET KIT	C0 - Static Radial Rating:7400 lbf; d:1.0000 in; Design Units:Imperial; Cone Part Number:L44642; da - Cone Frontface Backing Diameter:1.16 in; Cg - Geometry Factor:0.0526; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:3610 lbf; Aa - Cage-Cone Backface Clearance:0.02 in; G2 - Heat Generation Factor (Rib-Roller End):8.9; C1 - Dynamic Radial Rating (1 million revolutions)6:8010 lbf;
Komatsu KIT 707-99-14970 SEAL KIT	G:R1/8"; B1:92.1 mm; H:82.5 mm; L1:78 mm; H1:27.5 mm; T min.:-20 °C; s1:61.2 mm; Recommended tightening torque for set screw:16.8 Nm; C0:49.5 kN; d1:102 mm;
Komatsu KIT AS196262 ADJUSTMENT KIT	Designation of bearing:EX203-11G2; H2:41 mm; T min.:-20 °C; d1:32.4 mm; S:17 mm; C0:6.65 kN; H:78 mm; G:R1/8"; A:21 mm; B:34 mm;
Komatsu KIT YM729903-92741KF GASKET KIT	Bearing Used:Deep Groove Ball Bea; Width T(mm):12; Bearing I.D. d(mm):20; Type:Bearings with Housin; Volume Discount:Available; Flange Shape:Compact Type; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining;
Komatsu KIT 721-98-02770 SEAL KIT	Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):52400; Unit Body Material:Cast Iron; Bearing Unit, Type:Diamond Flange Shape; Diameter series symbol:Used for Light load; Surface Treatment:No; Grease Type:Standard Grease; Bearing Inner Dia. Shape:Cylindrical Bore Set; d:60; Stroke:No;
Komatsu KIT 707-99-37090 SEAL KIT	G:R1/8"; B1:92.1 mm; H:82.5 mm; L1:78 mm; H1:27.5 mm; T min.:-20 °C; s1:61.2 mm; Recommended tightening torque for set screw:16.8 Nm; C0:49.5 kN; d1:102 mm;