Komatsu KIT 721-98-00850 SEAL KIT	G:R1/8"; B1:92.1 mm; H:82.5 mm; L1:78 mm; H1:27.5 mm; T min.:-20 °C; s1:61.2 mm; Recommended tightening torque for set screw:16.8 Nm; C0:49.5 kN; d1:102 mm;
Komatsu KIT 721-98-02710 SEAL KIT	Bearing Part Number:6000; Type:Bearings with Housin; Seals:DD (Contact Rubber S; Holder Surface Treatment:Not Provided; Bearing I.D. d(mm):10; Bearing Used:Deep Groove Ball Bea; Width T(mm):15; Number of Bearings:Single;
Komatsu KIT AS202011 KIT	C0 - Static Radial Rating:7400 lbf; d:1.0000 in; Design Units:Imperial; Cone Part Number:L44642; da - Cone Frontface Backing Diameter:1.16 in; Cg - Geometry Factor:0.0526; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:3610 lbf; Aa - Cage-Cone Backface Clearance:0.02 in; G2 - Heat Generation Factor (Rib-Roller End):8.9; C1 - Dynamic Radial Rating (1 million revolutions)6:8010 lbf;
Komatsu KIT 844200700 GASKET KIT	Bearing Style:Open Type; Basic Dynamic Load Rating(N):16000; RoHS:6; Number of Raceway Ring Rows:Single Row; Symbol of Bearing Ring Shape:No; Combination symbol:No; O.D.(Ø):80; Retainer Type:Punching; Max. Allowed rpm(rpm):8000; I.D.(Ø):55;
Komatsu KIT 21D-61-12201 GASKET KIT	Designation of housing:PFT205-; N:8,7mm; H:95.2 mm; B:21.4 mm; A1:4 mm; Designation of bearing:ES205-14G2T04; B1:30.9 mm; A2:23.4 mm; A:8.7 mm; J:76 mm;
Komatsu KIT ASCN-207117 KIT	C0 - Static Radial Rating:7400 lbf; d:1.0000 in; Design Units:Imperial; Cone Part Number:L44642; da - Cone Frontface Backing Diameter:1.16 in; Cg - Geometry Factor:0.0526; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:3610 lbf; Aa - Cage-Cone Backface Clearance:0.02 in; G2 - Heat Generation Factor (Rib-Roller End):8.9; C1 - Dynamic Radial Rating (1 million revolutions)6:8010 lbf;
Komatsu KIT 721-98-01280 SEAL KIT	G:R1/8"; B1:92.1 mm; H:82.5 mm; L1:78 mm; H1:27.5 mm; T min.:-20 °C; s1:61.2 mm; Recommended tightening torque for set screw:16.8 Nm; C0:49.5 kN; d1:102 mm;
Komatsu KIT 6222-K2-9900 GASKET KIT	G:R1/8"; B1:92.1 mm; H:82.5 mm; L1:78 mm; H1:27.5 mm; T min.:-20 °C; s1:61.2 mm; Recommended tightening torque for set screw:16.8 Nm; C0:49.5 kN; d1:102 mm;