Komatsu KIT 721-98-01920 SEAL KIT	Designation of bearing:EX203-11G2; H2:41 mm; T min.:-20 °C; d1:32.4 mm; S:17 mm; C0:6.65 kN; H:78 mm; G:R1/8"; A:21 mm; B:34 mm;
Komatsu KIT 362-64-51110 SEAL KIT	C0 - Static Radial Rating:7400 lbf; d:1.0000 in; Design Units:Imperial; Cone Part Number:L44642; da - Cone Frontface Backing Diameter:1.16 in; Cg - Geometry Factor:0.0526; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:3610 lbf; Aa - Cage-Cone Backface Clearance:0.02 in; G2 - Heat Generation Factor (Rib-Roller End):8.9; C1 - Dynamic Radial Rating (1 million revolutions)6:8010 lbf;
Komatsu KIT 721-98-00510 SEAL KIT	G:R1/8"; B1:92.1 mm; H:82.5 mm; L1:78 mm; H1:27.5 mm; T min.:-20 °C; s1:61.2 mm; Recommended tightening torque for set screw:16.8 Nm; C0:49.5 kN; d1:102 mm;
Komatsu KIT ASCN-207117 KIT	C0 - Static Radial Rating:7400 lbf; d:1.0000 in; Design Units:Imperial; Cone Part Number:L44642; da - Cone Frontface Backing Diameter:1.16 in; Cg - Geometry Factor:0.0526; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:3610 lbf; Aa - Cage-Cone Backface Clearance:0.02 in; G2 - Heat Generation Factor (Rib-Roller End):8.9; C1 - Dynamic Radial Rating (1 million revolutions)6:8010 lbf;
Komatsu KIT 707-99-14980 SEAL KIT	Bearing Used:Deep Groove Ball Bea; Width T(mm):12; Bearing I.D. d(mm):20; Type:Bearings with Housin; Volume Discount:Available; Flange Shape:Compact Type; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining;
Komatsu KIT 3EB-02-52080KF KIT	T max.:100 °C; C0:32.8 kN; C:52.5 kN; Weight:2.3 kg; A:38 mm; H:130 mm; d:60 mm; Designation of bearing:US212G2; A5:38.8 mm; s1:26.85 mm;
Komatsu KIT NJ10101-GY025KF GASKET KIT	Inner/Outer Ring Material:Steel; Rotational Speed(rpm):2560; Rolling Element Material:Steel; Specifications:Standard; Size Standards:Metric System; Holder Symbol:W; Number of Raceway Ring Rows:Single Row; Basic Load Rating, Static Rating(N):265000; Low Torque Specification:No;
Komatsu KIT 707-99-74080 SEAL KIT	G:R1/8"; B1:92.1 mm; H:82.5 mm; L1:78 mm; H1:27.5 mm; T min.:-20 °C; s1:61.2 mm; Recommended tightening torque for set screw:16.8 Nm; C0:49.5 kN; d1:102 mm;