| Komatsu GLASS 42A-56-76490 GLASS WT412-15020KF GLASS | Cor - Static Load Rating:133087 lbf; Dimension D:15.0 in; Dimension A:10.2 in; Dimension P:1.0 in; Support Type:Take-Up; Tensioning Unit Type:Tension Type; Dimension V:7.5 in; Bearing - Housing - Seal:MSE404BRHRSS; Dimension T:20.0 in; Seal Type:Viton Single Lip; |
| Komatsu GLASS 20U-54-69R90 GLASS 21N-54-39730 GLASS WOOL | Fatigue limit load, Cu:218 kN; Nlim:1,700 rpm; Static load, C0:3,150 kN; Number of lubrication holes:3; e:0.22; Brand:SNR; Characteristic rolling element frequency, BSF:8.86 Hz; d:280 mm; Characteristic cage frequency, FTF:0.44 Hz; D:420 mm; |
| Komatsu GLASS 198-Z11-6630 GLASS 195-Z11-3260 GLASS | T min.:-40 °C; Recommended tightening torque for set screw:3.7 Nm; C0:11.2 kN; S:8 mm; B:30 mm; G:M6x1; A:21 mm; N:11,5mm; Designation of bearing:US206-18G2T04; d:28.58 mm; |
| Komatsu GLASS 22B-54-27180 GLASS 2A5-53-11911 GLASS | Fatigue limit load, Cu:218 kN; Nlim:1,700 rpm; Static load, C0:3,150 kN; Number of lubrication holes:3; e:0.22; Brand:SNR; Characteristic rolling element frequency, BSF:8.86 Hz; d:280 mm; Characteristic cage frequency, FTF:0.44 Hz; D:420 mm; |
| Komatsu GLASS 567-54-73121 GLASS 419-926-5511 GLASS | J:148 mm; e:22 mm; G:M6x1; Designation of bearing:UC209-28G2L3; d:44.45 mm; L1:90 mm; s1:24.6 mm; Weight:1.9 kg; N:15mm; Recommended tightening torque for set screw:8 Nm; |
| Komatsu GLASS 23C-953-7930 GLASS WT412-15070KF GLASS | Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Type:Bearings with Housin; Width T(mm):35; Bearing Part Number:625; Bearing I.D. d(mm):5; Volume Discount:Available; Bearing Retained:No; |
| Komatsu GLASS 21N-54-39730 GLASS WOOL 23F-950-3910 GLASS | Fatigue limit load, Cu:218 kN; Nlim:1,700 rpm; Static load, C0:3,150 kN; Number of lubrication holes:3; e:0.22; Brand:SNR; Characteristic rolling element frequency, BSF:8.86 Hz; d:280 mm; Characteristic cage frequency, FTF:0.44 Hz; D:420 mm; |
| Komatsu GLASS 41E-56-21231 GLASS 154-Z11-1430 GLASS | B:22 mm; Brand:NTN; Characteristic cage frequency, FTF:0.41 Hz; ra max:1.5 mm; Characteristic rolling element frequency, BSF:5.26 Hz; da max:75 mm; Max operating temperature, Tmax:110 °C; Radial clearance class:C3; rs min:1.5 mm; Dynamic load, C:52.5 kN; |