| Komatsu GLASS 416-925-3560 GLASS 208-53-41580 GLASS | B:22 mm; Brand:NTN; Characteristic cage frequency, FTF:0.41 Hz; ra max:1.5 mm; Characteristic rolling element frequency, BSF:5.26 Hz; da max:75 mm; Max operating temperature, Tmax:110 °C; Radial clearance class:C3; rs min:1.5 mm; Dynamic load, C:52.5 kN; |
| Komatsu GLASS 113-Y79-1632 GLASS 17A-979-1361 GLASS | ra max:2 mm; Characteristic inner ring frequency, BPFI:12.83 Hz; Static load, C0:517 kN; Number of lubrication holes:3; Nref:3,500 rpm; d:110 mm; D1:154.6 mm; Da max:161.2 mm; k:3.5 mm; Brand:SNR; |
| Komatsu GLASS 22B-Z58-1970 GLASS 23B-925-8551 GLASS | Bearing Retained:No; Bearing Type:Deep Groove Ball Bea; Width T(mm):48; Surface Treatment:No; Number of Bearings:Single; Housing Material:A2017; Main Body Shape:T Type; |
| Komatsu GLASS WT93883-H79A0KF GLASS 232-957-6460 GLASS | H:54 mm; s1:20.6 mm; C:31.85 kN; N:17mm; H2:108 mm; Designation of bearing:US209-28G2T04; Designation of closed end cover:SCC209; Recommended tightening torque for set screw:8 Nm; N1:23 mm; Dz:95 mm; |
| Komatsu GLASS 21N-54-39721 GLASS WOOL 195-Z11-8340 GLASS | Fatigue limit load, Cu:218 kN; Nlim:1,700 rpm; Static load, C0:3,150 kN; Number of lubrication holes:3; e:0.22; Brand:SNR; Characteristic rolling element frequency, BSF:8.86 Hz; d:280 mm; Characteristic cage frequency, FTF:0.44 Hz; D:420 mm; |
| Komatsu GLASS 419-923-5541 GLASS TC558B762111KF GLASS | Fatigue limit load, Cu:218 kN; Nlim:1,700 rpm; Static load, C0:3,150 kN; Number of lubrication holes:3; e:0.22; Brand:SNR; Characteristic rolling element frequency, BSF:8.86 Hz; d:280 mm; Characteristic cage frequency, FTF:0.44 Hz; D:420 mm; |
| Komatsu GLASS YNNKF07405KF GLASS YNNKF00531KF GLASS | Cor - Static Load Rating:133087 lbf; Dimension D:15.0 in; Dimension A:10.2 in; Dimension P:1.0 in; Support Type:Take-Up; Tensioning Unit Type:Tension Type; Dimension V:7.5 in; Bearing - Housing - Seal:MSE404BRHRSS; Dimension T:20.0 in; Seal Type:Viton Single Lip; |
| Komatsu GLASS UP3BA517211314KF GLASS 56E-54-23151 GLASS | B:22 mm; Brand:NTN; Characteristic cage frequency, FTF:0.41 Hz; ra max:1.5 mm; Characteristic rolling element frequency, BSF:5.26 Hz; da max:75 mm; Max operating temperature, Tmax:110 °C; Radial clearance class:C3; rs min:1.5 mm; Dynamic load, C:52.5 kN; |