Komatsu BAR 37B-8E7-5200KF BAR	Seal:VR320; J:350.00 mm; J2:378 mm; Locating Rings (width x OD):SR215X19.5; Shaft Diameter db:115 mm; N1:24.00 mm; L:410.00 mm; G:M16; H1:140.0 mm; Seal Type:V-ring;
Komatsu BAR 23B-71-11320 DRAWBAR	Recommended tightening torque for set screw:16.8 Nm; L2:16 mm; N:29mm; H:117 mm; C:35.1 kN; A5:32.6 mm; H2:83 mm; Designation of housing:T210-; B:51.6 mm; Designation of bearing:UC210-31G2T04;
Komatsu BAR 566-83-6E230 BAR	Pillow/Plummer Block Style:Split Cylindrical Ho; Cr - Dynamic Load Rating:208398 lbf; Weight:557 lb; Ca - Axial Load Rating:16006 lbf; Maximum Speed:1120 rpm; Bearing Type:Split Cylindrical Re; Bearing - Housing - Seal:MSM175BRH; Dimension H1:1.7 in; Dimension H2:21.5 in; Dimension H:10.748 in;
Komatsu BAR 13S-70-11553 BAR	Seal:VR320; J:350.00 mm; J2:378 mm; Locating Rings (width x OD):SR215X19.5; Shaft Diameter db:115 mm; N1:24.00 mm; L:410.00 mm; G:M16; H1:140.0 mm; Seal Type:V-ring;
Komatsu BAR 428-46-24120 BAR	Bearing Material:[Steel] Steel; Bearing Part Number:606; Seals:ZZ (Double Shield); Shape:Flange Type; Holder Surface Treatment:Electroless Nickel P; Flange Shape:Round Type; Number of Bearings:Double; Bearing Retained:No; Type:Bearings with Housin;
Komatsu BAR 175-819-2120 DRAWBAR	Nref:1,300 rpm; Characteristic cage frequency, FTF:0.44 Hz; Mass:47.28 kg; b:18.3 mm; ra max:3 mm; Y2:4.4; B:104 mm; k:8 mm; Static load, C0:2,910 kN; d:260 mm;
Komatsu BAR UC4020711582 SLED ASS'Y	Recommended tightening torque for set screw:16.8 Nm; L2:16 mm; N:29mm; H:117 mm; C:35.1 kN; A5:32.6 mm; H2:83 mm; Designation of housing:T210-; B:51.6 mm; Designation of bearing:UC210-31G2T04;
Komatsu BAR 45B-BHF-2420KF BAR	Size Unit:Inch; Material:52100 Steel; Diameter(inch):17/64; Days to Ship:8 Days;