Komatsu BAR LM370187 BAR | N:35mm; S:33 mm; C0:68 kN; A1:28 mm; L:185 mm; e:36 mm; H:315 mm; G:M10x1; A2:81 mm; A:61 mm; |
Komatsu BAR 22B-958-8680 BAR | N:35mm; S:33 mm; C0:68 kN; A1:28 mm; L:185 mm; e:36 mm; H:315 mm; G:M10x1; A2:81 mm; A:61 mm; |
Komatsu BAR 10G-50-22211 BAR | Nref:1,300 rpm; Characteristic cage frequency, FTF:0.44 Hz; Mass:47.28 kg; b:18.3 mm; ra max:3 mm; Y2:4.4; B:104 mm; k:8 mm; Static load, C0:2,910 kN; d:260 mm; |
Komatsu BAR 45B-AHF-2420KF BAR | Pillow/Plummer Block Style:Split Cylindrical Ho; Cr - Dynamic Load Rating:208398 lbf; Weight:557 lb; Ca - Axial Load Rating:16006 lbf; Maximum Speed:1120 rpm; Bearing Type:Split Cylindrical Re; Bearing - Housing - Seal:MSM175BRH; Dimension H1:1.7 in; Dimension H2:21.5 in; Dimension H:10.748 in; |
Komatsu BAR 175-21-31543 BAR | Recommended tightening torque for set screw:16.8 Nm; L2:16 mm; N:29mm; H:117 mm; C:35.1 kN; A5:32.6 mm; H2:83 mm; Designation of housing:T210-; B:51.6 mm; Designation of bearing:UC210-31G2T04; |
Komatsu BAR 421-46-12880 BAR | Number of Bearings:Single; Bearing Part Number:6201; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):12; Type:Bearings with Housin; RoHS:6; Height H(mm):25 ~ 40; Lateral Width L(mm):42; |
Komatsu BAR 417-46-64142 BAR | Nref:1,300 rpm; Characteristic cage frequency, FTF:0.44 Hz; Mass:47.28 kg; b:18.3 mm; ra max:3 mm; Y2:4.4; B:104 mm; k:8 mm; Static load, C0:2,910 kN; d:260 mm; |
Komatsu BAR 176-72-41162 BAR | Shape:Flange Type; Holder Surface Treatment:Black Oxide Coating; Flange O.D. H(φ):77; Bearing I.D. d(mm):25; Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; |