Komatsu SEAL 707-56-24020 SEAL	J:170 mm; Designation of open end cover:SCOE213-65; Recommended tightening torque for set screw:22 Nm; L:205 mm; Designation of bearing:EX213G2T04; B:68.2 mm; Designation of housing:FC213N-; A:49 mm; A2:67.6 mm; s1:57.6 mm;
Komatsu SEAL 17A-54-54240 SEAL	Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):20; Flange O.D. H(φ):41; Type:Bearings with Housin;
Komatsu SEAL TM0722-170 SEAL	G:5/16-24UNF; S:9.5 mm; SW:3.97 mm; C:17 mm; T min.:-20 °C; D:72 mm; C0:15.2 kN; C1:5.7 mm; B:25.4 mm; B2:17.5 mm;
Komatsu SEAL 707-56-15690 SEAL	Bolt Size:4 x M24; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H1:2.0 in; Series Type:Medium Series; Ca - Axial Load Rating:10206 lbf; Cr - Dynamic Load Rating:134885 lbf; Dimension M:7.0 in; Maximum Speed:1450 rpm; Dimension J:21.5 in; Cor - Static Load Rating:183669 lbf;
Komatsu SEAL 07013-50095 OIL SEAL	N:14mm; Z:18.5 mm; A1:25 mm; H1:17 mm; C0:11.2 kN; T min.:-20 °C; T max.:200 °C; C:19.5 kN; B:38.1 mm; J:118 mm;
Komatsu SEAL 234-22-61260 SEAL	Width T(mm):20 ～ 30; RoHS:6; Shape:Flange Type; Number of Bearings:Double; Seals:ZZ (Double Shield); Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:678; Flange Shape:Round Type; Holder Surface Treatment:Clear Anodize;
Komatsu SEAL 569-54-85340 SEAL	Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):55 ～ 120; Holder Surface Treatment:Electroless Nickel P; Bearing I.D. d(mm):35; Seals:DD (Contact Rubber S; Bearing Part Number:6007; Housing Material:1045 Carbon Steel;
Komatsu SEAL 114-X11-3410 SEAL	G:5/16-24UNF; S:9.5 mm; SW:3.97 mm; C:17 mm; T min.:-20 °C; D:72 mm; C0:15.2 kN; C1:5.7 mm; B:25.4 mm; B2:17.5 mm;