Komatsu SEAL 707-56-24030 SEAL	Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425;
Komatsu SEAL 561-54-84532 SEAL	Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):55 ～ 120; Holder Surface Treatment:Electroless Nickel P; Bearing I.D. d(mm):35; Seals:DD (Contact Rubber S; Bearing Part Number:6007; Housing Material:1045 Carbon Steel;
Komatsu SEAL 07013-50095 OIL SEAL	Bolt Size:4 x M24; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H1:2.0 in; Series Type:Medium Series; Ca - Axial Load Rating:10206 lbf; Cr - Dynamic Load Rating:134885 lbf; Dimension M:7.0 in; Maximum Speed:1450 rpm; Dimension J:21.5 in; Cor - Static Load Rating:183669 lbf;
Komatsu SEAL TM0722-170 SEAL	d:15.88 mm; H1:14 mm; G:M6x1; Designation of bearing:ES202-10G2; C0:4.78 kN; S:6.5 mm; A:30 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; L1:17 mm;
Komatsu SEAL 07012-20065 OIL SEAL	Designation of housing:FLE210N-; B1:43.7 mm; d1:67.2 mm; Designation of bearing:ES210G2T20; A:41.6 mm; J:157 mm; Z:38.9 mm; H:190 mm; s1:33.4 mm; T max.:200 °C;
Komatsu SEAL 21J-22-11190 OIL SEAL	Width T(mm):20 ～ 30; RoHS:6; Shape:Flange Type; Number of Bearings:Double; Seals:ZZ (Double Shield); Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:678; Flange Shape:Round Type; Holder Surface Treatment:Clear Anodize;
Komatsu SEAL 17M-03-54211 SEAL	Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):55 ～ 120; Holder Surface Treatment:Electroless Nickel P; Bearing I.D. d(mm):35; Seals:DD (Contact Rubber S; Bearing Part Number:6007; Housing Material:1045 Carbon Steel;
Komatsu SEAL 8261-70-1D80 SEAL	H:113 mm; d:20 mm; A1:11 mm; Designation of bearing:US204G2T20; T min.:-20 °C; A2:33 mm; S:7 mm; Designation of housing:FL204-; Recommended tightening torque for set screw:5.5 Nm; N:12mm;