Komatsu SEAL KHJC-62106-2 SEAL	d:15.88 mm; H1:14 mm; G:M6x1; Designation of bearing:ES202-10G2; C0:4.78 kN; S:6.5 mm; A:30 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; L1:17 mm;
Komatsu SEAL 421-22-31760 SEAL	Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425;
Komatsu SEAL 198-50-32282 SEAL	N:14mm; Z:18.5 mm; A1:25 mm; H1:17 mm; C0:11.2 kN; T min.:-20 °C; T max.:200 °C; C:19.5 kN; B:38.1 mm; J:118 mm;
Komatsu SEAL 20K-22-31690 SEAL	Features:Open; Outside Ring Width B:17.000 mm; Bore Size d:25 mm; Grease Reference Speed:12000 rpm; C0r - Static Load Rating:11.2 kN; Cr - Dynamic Load Rating:20.6 kN; Outside Diameter D:62.000 mm; Radius Rs min:1.100 mm; Oil Reference Speed:17000 rpm; Clearance:C3;
Komatsu SEAL 12Y-978-1490 SEAL	H:113 mm; d:20 mm; A1:11 mm; Designation of bearing:US204G2T20; T min.:-20 °C; A2:33 mm; S:7 mm; Designation of housing:FL204-; Recommended tightening torque for set screw:5.5 Nm; N:12mm;
Komatsu SEAL 07012-70160 SEAL	H:113 mm; d:20 mm; A1:11 mm; Designation of bearing:US204G2T20; T min.:-20 °C; A2:33 mm; S:7 mm; Designation of housing:FL204-; Recommended tightening torque for set screw:5.5 Nm; N:12mm;
Komatsu SEAL 426-56-31532 SEAL	Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):55 ～ 120; Holder Surface Treatment:Electroless Nickel P; Bearing I.D. d(mm):35; Seals:DD (Contact Rubber S; Bearing Part Number:6007; Housing Material:1045 Carbon Steel;
Komatsu SEAL 42C-12-11360 OIL SEAL	Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):20; Flange O.D. H(φ):41; Type:Bearings with Housin;