Komatsu SEAL DM90701740 SEAL	J:170 mm; Designation of open end cover:SCOE213-65; Recommended tightening torque for set screw:22 Nm; L:205 mm; Designation of bearing:EX213G2T04; B:68.2 mm; Designation of housing:FC213N-; A:49 mm; A2:67.6 mm; s1:57.6 mm;
Komatsu SEAL 21J-22-11190 OIL SEAL	C0:19.2 kN; B2:17.5 mm; d:36.51 mm; d1:55 mm; C:25 mm; m:6.7 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; B1:51.6 mm; G:5/16-24UNF;
Komatsu SEAL 198-911-9810 SEAL	L3:102 mm; Recommended tightening torque for set screw:16.8 Nm; H1:130 mm; SW:4.76 mm; L:194 mm; A:64 mm; A1:22 mm; G:M6x1; P:300 mm; C:52.5 kN;
Komatsu SEAL BT41560980JTK SEAL	Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425;
Komatsu SEAL UC1303030939 SEAL	Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):20; Flange O.D. H(φ):41; Type:Bearings with Housin;
Komatsu SEAL 154-03-76630 SEAL	C0:19.2 kN; B2:17.5 mm; d:36.51 mm; d1:55 mm; C:25 mm; m:6.7 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; B1:51.6 mm; G:5/16-24UNF;
Komatsu SEAL TM0722-170 SEAL	N:14mm; Z:18.5 mm; A1:25 mm; H1:17 mm; C0:11.2 kN; T min.:-20 °C; T max.:200 °C; C:19.5 kN; B:38.1 mm; J:118 mm;
Komatsu SEAL 21T-54-36220 SEAL	C0:19.2 kN; B2:17.5 mm; d:36.51 mm; d1:55 mm; C:25 mm; m:6.7 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; B1:51.6 mm; G:5/16-24UNF;