Komatsu SEAL 17A-54-47821 SEAL	d:15.88 mm; H1:14 mm; G:M6x1; Designation of bearing:ES202-10G2; C0:4.78 kN; S:6.5 mm; A:30 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; L1:17 mm;
Komatsu SEAL 426-33-41440 SEAL	Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):20; Flange O.D. H(φ):41; Type:Bearings with Housin;
Komatsu SEAL 42C-43-19120 OIL SEAL	Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425;
Komatsu SEAL 14X-03-61491 SEAL	J:170 mm; Designation of open end cover:SCOE213-65; Recommended tightening torque for set screw:22 Nm; L:205 mm; Designation of bearing:EX213G2T04; B:68.2 mm; Designation of housing:FC213N-; A:49 mm; A2:67.6 mm; s1:57.6 mm;
Komatsu SEAL 56C-23-13460 SEAL	L3:102 mm; Recommended tightening torque for set screw:16.8 Nm; H1:130 mm; SW:4.76 mm; L:194 mm; A:64 mm; A1:22 mm; G:M6x1; P:300 mm; C:52.5 kN;
Komatsu SEAL KHJC-62108-3 SEAL	Roller Guiding Method:Retainer Type; Shaft:Provided; Tightening Method:Hex Socket on Head; Roller Type:Flat Type; Unit:Metric Series; Material:[Stainless Steel] 44; RoHS:6; Allowable Load(N):499;
Komatsu SEAL 154-50-71260 SEAL	L3:102 mm; Recommended tightening torque for set screw:16.8 Nm; H1:130 mm; SW:4.76 mm; L:194 mm; A:64 mm; A1:22 mm; G:M6x1; P:300 mm; C:52.5 kN;
Komatsu SEAL 707-56-19110 DUST SEAL	G:5/16-24UNF; S:9.5 mm; SW:3.97 mm; C:17 mm; T min.:-20 °C; D:72 mm; C0:15.2 kN; C1:5.7 mm; B:25.4 mm; B2:17.5 mm;