Komatsu SEAL 566-09-31191 SEAL	H:113 mm; d:20 mm; A1:11 mm; Designation of bearing:US204G2T20; T min.:-20 °C; A2:33 mm; S:7 mm; Designation of housing:FL204-; Recommended tightening torque for set screw:5.5 Nm; N:12mm;
Komatsu SEAL 8240-70-5580 SEAL	Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):55 ～ 120; Holder Surface Treatment:Electroless Nickel P; Bearing I.D. d(mm):35; Seals:DD (Contact Rubber S; Bearing Part Number:6007; Housing Material:1045 Carbon Steel;
Komatsu SEAL 428-33-11580 SEAL	Bolt Size:4 x M24; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H1:2.0 in; Series Type:Medium Series; Ca - Axial Load Rating:10206 lbf; Cr - Dynamic Load Rating:134885 lbf; Dimension M:7.0 in; Maximum Speed:1450 rpm; Dimension J:21.5 in; Cor - Static Load Rating:183669 lbf;
Komatsu SEAL DM90701740 SEAL	J:170 mm; Designation of open end cover:SCOE213-65; Recommended tightening torque for set screw:22 Nm; L:205 mm; Designation of bearing:EX213G2T04; B:68.2 mm; Designation of housing:FC213N-; A:49 mm; A2:67.6 mm; s1:57.6 mm;
Komatsu SEAL 20Y-25-21311 SEAL	Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):55 ～ 120; Holder Surface Treatment:Electroless Nickel P; Bearing I.D. d(mm):35; Seals:DD (Contact Rubber S; Bearing Part Number:6007; Housing Material:1045 Carbon Steel;
Komatsu SEAL DM39609340 SEAL	Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425;
Komatsu SEAL DM90702040 SEAL	Features:Open; Outside Ring Width B:17.000 mm; Bore Size d:25 mm; Grease Reference Speed:12000 rpm; C0r - Static Load Rating:11.2 kN; Cr - Dynamic Load Rating:20.6 kN; Outside Diameter D:62.000 mm; Radius Rs min:1.100 mm; Oil Reference Speed:17000 rpm; Clearance:C3;
Komatsu SEAL 3FD-30-32230KF SEAL	L3:102 mm; Recommended tightening torque for set screw:16.8 Nm; H1:130 mm; SW:4.76 mm; L:194 mm; A:64 mm; A1:22 mm; G:M6x1; P:300 mm; C:52.5 kN;