Komatsu SEAL 234-22-81930 SEAL | J:170 mm; Designation of open end cover:SCOE213-65; Recommended tightening torque for set screw:22 Nm; L:205 mm; Designation of bearing:EX213G2T04; B:68.2 mm; Designation of housing:FC213N-; A:49 mm; A2:67.6 mm; s1:57.6 mm; |
Komatsu SEAL 561-34-71630 SEAL | Width T(mm):20 ~ 30; RoHS:6; Shape:Flange Type; Number of Bearings:Double; Seals:ZZ (Double Shield); Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:678; Flange Shape:Round Type; Holder Surface Treatment:Clear Anodize; |
Komatsu SEAL TM0722-170 SEAL | G:5/16-24UNF; S:9.5 mm; SW:3.97 mm; C:17 mm; T min.:-20 °C; D:72 mm; C0:15.2 kN; C1:5.7 mm; B:25.4 mm; B2:17.5 mm; |
Komatsu SEAL KD7-09210-2800 SEAL ASS'Y | H:113 mm; d:20 mm; A1:11 mm; Designation of bearing:US204G2T20; T min.:-20 °C; A2:33 mm; S:7 mm; Designation of housing:FL204-; Recommended tightening torque for set screw:5.5 Nm; N:12mm; |
Komatsu SEAL 707-56-19110 DUST SEAL | Features:Open; Outside Ring Width B:17.000 mm; Bore Size d:25 mm; Grease Reference Speed:12000 rpm; C0r - Static Load Rating:11.2 kN; Cr - Dynamic Load Rating:20.6 kN; Outside Diameter D:62.000 mm; Radius Rs min:1.100 mm; Oil Reference Speed:17000 rpm; Clearance:C3; |
Komatsu SEAL 562-34-51960 SEAL | Roller Guiding Method:Retainer Type; Shaft:Provided; Tightening Method:Hex Socket on Head; Roller Type:Flat Type; Unit:Metric Series; Material:[Stainless Steel] 44; RoHS:6; Allowable Load(N):499; |
Komatsu SEAL 6215-29-4220 SEAL ASS'Y | C0:19.2 kN; B2:17.5 mm; d:36.51 mm; d1:55 mm; C:25 mm; m:6.7 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; B1:51.6 mm; G:5/16-24UNF; |
Komatsu SEAL 42C-43-19120 OIL SEAL | Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425; |