Komatsu SEAL 707-56-14110 DUST SEAL	Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425;
Komatsu SEAL 07011-20150 OIL SEAL	J:170 mm; Designation of open end cover:SCOE213-65; Recommended tightening torque for set screw:22 Nm; L:205 mm; Designation of bearing:EX213G2T04; B:68.2 mm; Designation of housing:FC213N-; A:49 mm; A2:67.6 mm; s1:57.6 mm;
Komatsu SEAL DM39609340 SEAL	Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425;
Komatsu SEAL 209-25-61160 SEAL	L3:102 mm; Recommended tightening torque for set screw:16.8 Nm; H1:130 mm; SW:4.76 mm; L:194 mm; A:64 mm; A1:22 mm; G:M6x1; P:300 mm; C:52.5 kN;
Komatsu SEAL 22B-54-28350 SEAL	Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):20; Flange O.D. H(φ):41; Type:Bearings with Housin;
Komatsu SEAL 21T-30-14230 SEAL	L3:102 mm; Recommended tightening torque for set screw:16.8 Nm; H1:130 mm; SW:4.76 mm; L:194 mm; A:64 mm; A1:22 mm; G:M6x1; P:300 mm; C:52.5 kN;
Komatsu SEAL 56C-23-13460 SEAL	Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):55 ～ 120; Holder Surface Treatment:Electroless Nickel P; Bearing I.D. d(mm):35; Seals:DD (Contact Rubber S; Bearing Part Number:6007; Housing Material:1045 Carbon Steel;
Komatsu SEAL 561-54-62162 SEAL	Width T(mm):20 ～ 30; RoHS:6; Shape:Flange Type; Number of Bearings:Double; Seals:ZZ (Double Shield); Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:678; Flange Shape:Round Type; Holder Surface Treatment:Clear Anodize;