Komatsu SEAL 12Y-978-1610 SEAL	Features:Open; Outside Ring Width B:17.000 mm; Bore Size d:25 mm; Grease Reference Speed:12000 rpm; C0r - Static Load Rating:11.2 kN; Cr - Dynamic Load Rating:20.6 kN; Outside Diameter D:62.000 mm; Radius Rs min:1.100 mm; Oil Reference Speed:17000 rpm; Clearance:C3;
Komatsu SEAL 23H-22-11930 SEAL	Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):20; Flange O.D. H(φ):41; Type:Bearings with Housin;
Komatsu SEAL 17A-Z11-1340 SEAL	Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):20; Flange O.D. H(φ):41; Type:Bearings with Housin;
Komatsu SEAL 707-56-14530 SEAL	L3:102 mm; Recommended tightening torque for set screw:16.8 Nm; H1:130 mm; SW:4.76 mm; L:194 mm; A:64 mm; A1:22 mm; G:M6x1; P:300 mm; C:52.5 kN;
Komatsu SEAL 17A-54-55810 SEAL	J:170 mm; Designation of open end cover:SCOE213-65; Recommended tightening torque for set screw:22 Nm; L:205 mm; Designation of bearing:EX213G2T04; B:68.2 mm; Designation of housing:FC213N-; A:49 mm; A2:67.6 mm; s1:57.6 mm;
Komatsu SEAL 114-X11-3410 SEAL	H:113 mm; d:20 mm; A1:11 mm; Designation of bearing:US204G2T20; T min.:-20 °C; A2:33 mm; S:7 mm; Designation of housing:FL204-; Recommended tightening torque for set screw:5.5 Nm; N:12mm;
Komatsu SEAL 154-03-75421 SEAL	Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425;
Komatsu SEAL 707-56-18020 DUST SEAL	H:113 mm; d:20 mm; A1:11 mm; Designation of bearing:US204G2T20; T min.:-20 °C; A2:33 mm; S:7 mm; Designation of housing:FL204-; Recommended tightening torque for set screw:5.5 Nm; N:12mm;