Komatsu SEAL 290H-20-1250 SEAL	d:15.88 mm; H1:14 mm; G:M6x1; Designation of bearing:ES202-10G2; C0:4.78 kN; S:6.5 mm; A:30 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; L1:17 mm;
Komatsu SEAL 11Y-54-13760 SEAL	Designation of housing:FLE210N-; B1:43.7 mm; d1:67.2 mm; Designation of bearing:ES210G2T20; A:41.6 mm; J:157 mm; Z:38.9 mm; H:190 mm; s1:33.4 mm; T max.:200 °C;
Komatsu SEAL KV-X1X0-5180 OIL SEAL	C0:19.2 kN; B2:17.5 mm; d:36.51 mm; d1:55 mm; C:25 mm; m:6.7 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; B1:51.6 mm; G:5/16-24UNF;
Komatsu SEAL 21T-30-14230 SEAL	L3:102 mm; Recommended tightening torque for set screw:16.8 Nm; H1:130 mm; SW:4.76 mm; L:194 mm; A:64 mm; A1:22 mm; G:M6x1; P:300 mm; C:52.5 kN;
Komatsu SEAL 56D-80-15350 SEAL	N:14mm; Z:18.5 mm; A1:25 mm; H1:17 mm; C0:11.2 kN; T min.:-20 °C; T max.:200 °C; C:19.5 kN; B:38.1 mm; J:118 mm;
Komatsu SEAL DM90702040 SEAL	Features:Open; Outside Ring Width B:17.000 mm; Bore Size d:25 mm; Grease Reference Speed:12000 rpm; C0r - Static Load Rating:11.2 kN; Cr - Dynamic Load Rating:20.6 kN; Outside Diameter D:62.000 mm; Radius Rs min:1.100 mm; Oil Reference Speed:17000 rpm; Clearance:C3;
Komatsu SEAL DM65135140 SEAL	Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):20; Flange O.D. H(φ):41; Type:Bearings with Housin;
Komatsu SEAL 154-54-77810 SEAL	Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425;