Komatsu SEAL 17A-Z11-1570 SEAL	N:14mm; Z:18.5 mm; A1:25 mm; H1:17 mm; C0:11.2 kN; T min.:-20 °C; T max.:200 °C; C:19.5 kN; B:38.1 mm; J:118 mm;
Komatsu SEAL 561-34-71530 SEAL	H:113 mm; d:20 mm; A1:11 mm; Designation of bearing:US204G2T20; T min.:-20 °C; A2:33 mm; S:7 mm; Designation of housing:FL204-; Recommended tightening torque for set screw:5.5 Nm; N:12mm;
Komatsu SEAL 567-54-71151 SEAL	Bolt Size:4 x M24; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H1:2.0 in; Series Type:Medium Series; Ca - Axial Load Rating:10206 lbf; Cr - Dynamic Load Rating:134885 lbf; Dimension M:7.0 in; Maximum Speed:1450 rpm; Dimension J:21.5 in; Cor - Static Load Rating:183669 lbf;
Komatsu SEAL 795-799-2130 SEALANT	Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):55 ～ 120; Holder Surface Treatment:Electroless Nickel P; Bearing I.D. d(mm):35; Seals:DD (Contact Rubber S; Bearing Part Number:6007; Housing Material:1045 Carbon Steel;
Komatsu SEAL 21T-54-36220 SEAL	N:14mm; Z:18.5 mm; A1:25 mm; H1:17 mm; C0:11.2 kN; T min.:-20 °C; T max.:200 °C; C:19.5 kN; B:38.1 mm; J:118 mm;
Komatsu SEAL 12Y-978-1570 SEAL	G:5/16-24UNF; S:9.5 mm; SW:3.97 mm; C:17 mm; T min.:-20 °C; D:72 mm; C0:15.2 kN; C1:5.7 mm; B:25.4 mm; B2:17.5 mm;
Komatsu SEAL 198-911-6270 SEAL	d:15.88 mm; H1:14 mm; G:M6x1; Designation of bearing:ES202-10G2; C0:4.78 kN; S:6.5 mm; A:30 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; L1:17 mm;
Komatsu SEAL 428-22-11790 SEAL	H:113 mm; d:20 mm; A1:11 mm; Designation of bearing:US204G2T20; T min.:-20 °C; A2:33 mm; S:7 mm; Designation of housing:FL204-; Recommended tightening torque for set screw:5.5 Nm; N:12mm;