Komatsu SEAL 12Y-978-1570 SEAL	Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425;
Komatsu SEAL 707-56-24530 SEAL	Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):55 ～ 120; Holder Surface Treatment:Electroless Nickel P; Bearing I.D. d(mm):35; Seals:DD (Contact Rubber S; Bearing Part Number:6007; Housing Material:1045 Carbon Steel;
Komatsu SEAL 154-50-71260 SEAL	L3:102 mm; Recommended tightening torque for set screw:16.8 Nm; H1:130 mm; SW:4.76 mm; L:194 mm; A:64 mm; A1:22 mm; G:M6x1; P:300 mm; C:52.5 kN;
Komatsu SEAL 561-54-62162 SEAL	Width T(mm):20 ～ 30; RoHS:6; Shape:Flange Type; Number of Bearings:Double; Seals:ZZ (Double Shield); Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:678; Flange Shape:Round Type; Holder Surface Treatment:Clear Anodize;
Komatsu SEAL BT41560980D SEAL	Width T(mm):20 ～ 30; RoHS:6; Shape:Flange Type; Number of Bearings:Double; Seals:ZZ (Double Shield); Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:678; Flange Shape:Round Type; Holder Surface Treatment:Clear Anodize;
Komatsu SEAL 17A-Z11-1340 SEAL	H:113 mm; d:20 mm; A1:11 mm; Designation of bearing:US204G2T20; T min.:-20 °C; A2:33 mm; S:7 mm; Designation of housing:FL204-; Recommended tightening torque for set screw:5.5 Nm; N:12mm;
Komatsu SEAL 07012-60080 SEAL	G:5/16-24UNF; S:9.5 mm; SW:3.97 mm; C:17 mm; T min.:-20 °C; D:72 mm; C0:15.2 kN; C1:5.7 mm; B:25.4 mm; B2:17.5 mm;
Komatsu SEAL 6246-11-5210 SEAL	H:113 mm; d:20 mm; A1:11 mm; Designation of bearing:US204G2T20; T min.:-20 °C; A2:33 mm; S:7 mm; Designation of housing:FL204-; Recommended tightening torque for set screw:5.5 Nm; N:12mm;