Komatsu SEAL 721-47-12170 SEAL	G:5/16-24UNF; S:9.5 mm; SW:3.97 mm; C:17 mm; T min.:-20 °C; D:72 mm; C0:15.2 kN; C1:5.7 mm; B:25.4 mm; B2:17.5 mm;
Komatsu SEAL 707-56-18150 SEAL	Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425;
Komatsu SEAL 07011-20110 OIL SEAL	Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):20; Flange O.D. H(φ):41; Type:Bearings with Housin;
Komatsu SEAL DM46162840 SEAL	d:15.88 mm; H1:14 mm; G:M6x1; Designation of bearing:ES202-10G2; C0:4.78 kN; S:6.5 mm; A:30 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; L1:17 mm;
Komatsu SEAL BT41560980DTK SEAL	Width T(mm):20 ～ 30; RoHS:6; Shape:Flange Type; Number of Bearings:Double; Seals:ZZ (Double Shield); Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:678; Flange Shape:Round Type; Holder Surface Treatment:Clear Anodize;
Komatsu SEAL 154-03-75892 SEAL	Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):20; Flange O.D. H(φ):41; Type:Bearings with Housin;
Komatsu SEAL 562-34-51590 SEAL	Features:Open; Outside Ring Width B:17.000 mm; Bore Size d:25 mm; Grease Reference Speed:12000 rpm; C0r - Static Load Rating:11.2 kN; Cr - Dynamic Load Rating:20.6 kN; Outside Diameter D:62.000 mm; Radius Rs min:1.100 mm; Oil Reference Speed:17000 rpm; Clearance:C3;
Komatsu SEAL 566-09-31191 SEAL	H:113 mm; d:20 mm; A1:11 mm; Designation of bearing:US204G2T20; T min.:-20 °C; A2:33 mm; S:7 mm; Designation of housing:FL204-; Recommended tightening torque for set screw:5.5 Nm; N:12mm;