Komatsu SEAL 12Y-978-1570 SEAL	G:5/16-24UNF; S:9.5 mm; SW:3.97 mm; C:17 mm; T min.:-20 °C; D:72 mm; C0:15.2 kN; C1:5.7 mm; B:25.4 mm; B2:17.5 mm;
Komatsu SEAL FUFZD8322217KZ FLOATING SEAL	Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Width T(mm):20; Flange O.D. H(φ):41; Type:Bearings with Housin;
Komatsu SEAL 198-Z11-3541 SEAL	C0:19.2 kN; B2:17.5 mm; d:36.51 mm; d1:55 mm; C:25 mm; m:6.7 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; B1:51.6 mm; G:5/16-24UNF;
Komatsu SEAL 11Y-Z78-1662 SEAL	Dynamic load, C:135 kN; r1s min:2.1 mm; d1:91 mm; Da max:129 mm; Category:Bearings; da max:81 mm; Characteristic inner ring frequency, BPFI:7.11 Hz; E:121.5 mm; ra max:2 mm; EAN:4547359123425;
Komatsu SEAL 150-09-11160 OIL SEAL	N:14mm; Z:18.5 mm; A1:25 mm; H1:17 mm; C0:11.2 kN; T min.:-20 °C; T max.:200 °C; C:19.5 kN; B:38.1 mm; J:118 mm;
Komatsu SEAL 8240-70-5580 SEAL	Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):55 ～ 120; Holder Surface Treatment:Electroless Nickel P; Bearing I.D. d(mm):35; Seals:DD (Contact Rubber S; Bearing Part Number:6007; Housing Material:1045 Carbon Steel;
Komatsu SEAL 17M-03-54181 SEAL	L3:102 mm; Recommended tightening torque for set screw:16.8 Nm; H1:130 mm; SW:4.76 mm; L:194 mm; A:64 mm; A1:22 mm; G:M6x1; P:300 mm; C:52.5 kN;
Komatsu SEAL 17M-03-54111 SEAL	C0:19.2 kN; B2:17.5 mm; d:36.51 mm; d1:55 mm; C:25 mm; m:6.7 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; B1:51.6 mm; G:5/16-24UNF;