Komatsu PISTON 707-91-91111 PISTON ASS'Y | Bearing Part Number:6000; T(mm):25 ~ 40; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Thickness, Height Indication:T Selection, h Confi; Shape:Bottom Mount; Number of Bearings:Double; Type:Bearings with Housin; RoHS:6; |
Komatsu PISTON 706-8J-00640 PISTON ASS'Y | Bearing Part Number:6000; T(mm):25 ~ 40; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Thickness, Height Indication:T Selection, h Confi; Shape:Bottom Mount; Number of Bearings:Double; Type:Bearings with Housin; RoHS:6; |
Komatsu PISTON 154-15-62730 PISTON | Nlim (grease):25,000 rpm; Internal Special Features:No; EAN:4547359554205; D:30 mm; Other Features:Deep Groove | Non-Fr; Bore:0.394 Inch | 10 Mill; Weight / LBS:0.071; ra max:0.6 mm; Characteristic cage frequency, FTF:0.38 Hz; |
Komatsu PISTON 708-2G-03650 PISTON ASS'Y | d:2.1250 in; G2 - Heat Generation Factor (Rib-Roller End):18.5; T - Bearing Width to Flange:0.4063 in; R - Cone Backface To Clear Radius1:0.06 in; Ab - Cage-Cone Frontface Clearance:0.11 in; C0 - Static Radial Rating:36200 lbf; Y - ISO Factor9:1.82; D:3.6718 in; r - Cup Backface To Clear Radius2:0.030 in; G1 - Heat Generation Factor (Roller-Raceway)10:52.5; |
Komatsu PISTON 707-91-91060 PISTON ASS'Y | Bearing Part Number:6000; T(mm):25 ~ 40; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Thickness, Height Indication:T Selection, h Confi; Shape:Bottom Mount; Number of Bearings:Double; Type:Bearings with Housin; RoHS:6; |
Komatsu PISTON OK783401DKF PISTON | Aa - Cage-Cone Backface Clearance:0.07 in; G1 - Heat Generation Factor (Roller-Raceway)11:84.2; Series:33000; G2 - Heat Generation Factor (Rib-Roller End):25.9; R - Cone Backface To Clear Radius1:0.03 in; Y2 - ISO Factor10:2.31; K - Factor7:1.34; d:2.5000 in; D:4.6250 in; Design Units:Imperial; |
Komatsu PISTON 562-33-51120 PISTON | Recommended tightening torque for set screw:11.5 Nm; A1:27 mm; T min.:-40 °C; Z:59.9 mm; L1:35 mm; H1:20 mm; L:100 mm; B:42.9 mm; T max.:100 °C; S:17.5 mm; |
Komatsu PISTON 6221-31-2110 PISTON | Z:33.5 mm; T min.:-40 °C; H2:156 mm; J:203 mm; T max.:100 °C; H1:27.5 mm; S:34.1 mm; N:22mm; G:R1/8"; s1:57.6 mm; |