Komatsu PISTON NJ12010-GS10EKF PISTON	Cg - Geometry Factor:0.127; Da - Cup Frontface Backing Diameter:7.83 in; C - Cup Width:1.3750 in; e - ISO Factor2:0.46; Y - ISO Factor3:1.31; Series:795; r - Cup Backface To Clear Radius1:0.130 in; D:8.1250 in; Design Units:Imperial; Db - Cup Backface Backing Diameter:7.32 in;
Komatsu PISTON 708-8H-33390 PISTON ASS'Y	L:240 mm; H2:140 mm; A1:42 mm; C0:32.8 kN; d:57.15 mm; Weight:4.5 kg; s1:26.85 mm; H1:25 mm; H:69.9 mm; C:52.5 kN;
Komatsu PISTON 720-1B-03011 PISTON ASS'Y	T max.:200 °C; s1:13.5 mm; A:21 mm; T min.:-20 °C; S:7.5 mm; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; H2:41 mm; Weight:1.46 kg; H:78 mm;
Komatsu PISTON 14X-15-32760 PISTON	d:2.1250 in; G2 - Heat Generation Factor (Rib-Roller End):18.5; T - Bearing Width to Flange:0.4063 in; R - Cone Backface To Clear Radius1:0.06 in; Ab - Cage-Cone Frontface Clearance:0.11 in; C0 - Static Radial Rating:36200 lbf; Y - ISO Factor9:1.82; D:3.6718 in; r - Cup Backface To Clear Radius2:0.030 in; G1 - Heat Generation Factor (Roller-Raceway)10:52.5;
Komatsu PISTON 707-58-50J50 R.PISTON	da - Inner Ring Backing Diameter:725.000 mm; D:980.000 mm; Bearing Weight:608.000 Kg; B - Outer Ring Width:230.000 mm; C0 - Static Radial Rating:14000000 N; Tapered Bore:N; Cg - Geometry Factor3:0.372; R - Inner Ring To Clear Radius4:6.000 mm; Da - Outer Ring Backing Diameter:914.000 mm; C - Inner Ring Width:230.000 mm;
Komatsu PISTON UD80P624-1KF PISTON	Nlim (grease):25,000 rpm; Internal Special Features:No; EAN:4547359554205; D:30 mm; Other Features:Deep Groove | Non-Fr; Bore:0.394 Inch | 10 Mill; Weight / LBS:0.071; ra max:0.6 mm; Characteristic cage frequency, FTF:0.38 Hz;
Komatsu PISTON 707-91-91070 PISTON	Cg - Geometry Factor:0.127; Da - Cup Frontface Backing Diameter:7.83 in; C - Cup Width:1.3750 in; e - ISO Factor2:0.46; Y - ISO Factor3:1.31; Series:795; r - Cup Backface To Clear Radius1:0.130 in; D:8.1250 in; Design Units:Imperial; Db - Cup Backface Backing Diameter:7.32 in;
Komatsu PISTON 17A-15-42760 PISTON	T max.:200 °C; s1:13.5 mm; A:21 mm; T min.:-20 °C; S:7.5 mm; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; H2:41 mm; Weight:1.46 kg; H:78 mm;