Komatsu PISTON 195-15-12791 PISTON	G1 - Heat Generation Factor (Roller-Raceway):8.2; Series:32204; D:47.000 mm; e - ISO Factor3:0.33; r - Cup Backface To Clear Radius1:1.02 mm; Da - Cup Frontface Backing Diameter:43.94 mm; Db - Cup Backface Backing Diameter:40.39 mm; C - Cup Width:15.000 mm; Y - ISO Factor4:1.81; Design Units:METRIC;
Komatsu PISTON UD80P624-1KF PISTON	Nlim (grease):25,000 rpm; Internal Special Features:No; EAN:4547359554205; D:30 mm; Other Features:Deep Groove | Non-Fr; Bore:0.394 Inch | 10 Mill; Weight / LBS:0.071; ra max:0.6 mm; Characteristic cage frequency, FTF:0.38 Hz;
Komatsu PISTON 12G-15-52780 PISTON	Aa - Cage-Cone Backface Clearance:0.07 in; G1 - Heat Generation Factor (Roller-Raceway)11:84.2; Series:33000; G2 - Heat Generation Factor (Rib-Roller End):25.9; R - Cone Backface To Clear Radius1:0.03 in; Y2 - ISO Factor10:2.31; K - Factor7:1.34; d:2.5000 in; D:4.6250 in; Design Units:Imperial;
Komatsu PISTON 714-17-37130 PISTON	Recommended tightening torque for set screw:11.5 Nm; A1:27 mm; T min.:-40 °C; Z:59.9 mm; L1:35 mm; H1:20 mm; L:100 mm; B:42.9 mm; T max.:100 °C; S:17.5 mm;
Komatsu PISTON OK688342AKF PISTON	Weight:1.08 kg; d:28.58 mm; T min.:-20 °C; A:48 mm; B:38.1 mm; E:18 mm; L1:30 mm; A1:25 mm; G:M6x1; S:15.9 mm;
Komatsu PISTON 707-36-13130 PISTON	Z:33.5 mm; T min.:-40 °C; H2:156 mm; J:203 mm; T max.:100 °C; H1:27.5 mm; S:34.1 mm; N:22mm; G:R1/8"; s1:57.6 mm;
Komatsu PISTON 720-2T-03111 PISTON ASS'Y	da - Inner Ring Backing Diameter:725.000 mm; D:980.000 mm; Bearing Weight:608.000 Kg; B - Outer Ring Width:230.000 mm; C0 - Static Radial Rating:14000000 N; Tapered Bore:N; Cg - Geometry Factor3:0.372; R - Inner Ring To Clear Radius4:6.000 mm; Da - Outer Ring Backing Diameter:914.000 mm; C - Inner Ring Width:230.000 mm;
Komatsu PISTON UCR902119921 PISTON	Z:33.5 mm; T min.:-40 °C; H2:156 mm; J:203 mm; T max.:100 °C; H1:27.5 mm; S:34.1 mm; N:22mm; G:R1/8"; s1:57.6 mm;