Komatsu CAP 707-88-04740 CAP	Y1 - Geometry Factor:3.14; Dimension L Fix:3.87 in; Dimension SA:3.62 in; Shaft Tolerance:0.0020 in; Dimension H:0.94 in; Dimension N:2.930 in; Dimension BC:7.88 in; Dimension F:9.5 in; Dimension C:4.5000 in; Locking Style:Single Concentric;
Komatsu CAP 708-1L-31350 CAP	Torque Symbol:No; Combination symbol:No; Type:Ball; Types:No; RoHS:6; Basic Dynamic Load Rating(N):106000; Precision Grade Symbol:No; Low Torque Specification:No; Width(mm):33;
Komatsu CAP 708-1T-04561 CAP ASS'Y	Housing Width A:46.8 mm; Bolt Hole Size N:17.1 mm; Center of Bearing from Housing End A2:1.242 mm; e:0.105 in; Total Length H:215.9 mm; Inside Ring Outside Diameter:2.980 in; Housing Style:Two-Bolt Flange; Total Height L:127 mm; Series:Industrial; Flange Thickness A1:16.7 mm;
Komatsu CAP 140-70-13151 CAP	Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Height Indication:Height Selection; Days to Ship:8 Days; Height H(mm):25 ～ 40; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Bearing Part Number:6901; Number of Bearings:Single; Holder Surface Treatment:Black Oxide Coating;
Komatsu CAP 154-01-85331 CAP	Cage Type:Stamped Steel; Da - Cup Frontface Backing Diameter:66.00 mm; Cg - Geometry Factor:0.0668; C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Design Units:Imperial; K - Factor7:1.53; Cup Part Number:14284; Y - ISO Factor9:1.57; r - Cup Backface To Clear Radius2:2.29 mm; G2 - Heat Generation Factor (Rib-Roller End):13.3;
Komatsu CAP 427-04-11320 CAP	Static load, C0:71 kN; Nlim (oil):8,400 rpm; D:100 mm; Da max:92 mm; Nlim (grease):7,200 rpm; Characteristic rolling element frequency, BSF:4.98 Hz; Fatigue limit load, Cu:8.7 kN; F:58.5 mm; r1s min:1.5 mm; Inventory:0.0;
Komatsu CAP 17A-71-12541 CAP	B:42.9 mm; N1:16 mm; s1:21.45 mm; S:17.5 mm; L2:13 mm; A:37 mm; C:25.7 kN; L:129 mm; T min.:-20 °C; A5:25.4 mm;
Komatsu CAP 708-2G-04790 CAP ASS'Y	B:42.9 mm; N1:16 mm; s1:21.45 mm; S:17.5 mm; L2:13 mm; A:37 mm; C:25.7 kN; L:129 mm; T min.:-20 °C; A5:25.4 mm;