Komatsu CAP 17A-61-11120 CAP | N1:24.00 mm; Cage Type:EJ; J2:378 mm; C1 Dynamic Load Rating:694; Shaft Diameter da:95 mm; H:242 mm; Housing Mass:22.3 Kg; UPC Code:999999999; Locating Rings (width x OD):SR200X6.5; Max Oil Speed:3000; |
Komatsu CAP 17M-60-51260 CAP | Load Direction:Radial; Bearing Style:Open Type; Type:Ball; Specifications/Environment:Standard; Max. Allowed rpm(rpm):1500; Size Standards:Metric System; D:420; Days to Ship:Quote; Outer Ring Shape:Flat; |
Komatsu CAP 195-03-63270 CAP | Static load, C0:71 kN; Nlim (oil):8,400 rpm; D:100 mm; Da max:92 mm; Nlim (grease):7,200 rpm; Characteristic rolling element frequency, BSF:4.98 Hz; Fatigue limit load, Cu:8.7 kN; F:58.5 mm; r1s min:1.5 mm; Inventory:0.0; |
Komatsu CAP KBC0001-62005 CAP | Holder Surface Treatment:Black Oxide Coating; Flange Shape:Round Type; Bearing I.D. d(mm):10; Number of Bearings:Double; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Shape:Flanged Pilot Type; Bearing Retained:No; Days to Ship:8 Days or more; |
Komatsu CAP 708-2G-04930 CAP ASS'Y | Housing Width A:46.8 mm; Bolt Hole Size N:17.1 mm; Center of Bearing from Housing End A2:1.242 mm; e:0.105 in; Total Length H:215.9 mm; Inside Ring Outside Diameter:2.980 in; Housing Style:Two-Bolt Flange; Total Height L:127 mm; Series:Industrial; Flange Thickness A1:16.7 mm; |
Komatsu CAP 175-71-31221 CAP | Cage Type:Stamped Steel; Da - Cup Frontface Backing Diameter:66.00 mm; Cg - Geometry Factor:0.0668; C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Design Units:Imperial; K - Factor7:1.53; Cup Part Number:14284; Y - ISO Factor9:1.57; r - Cup Backface To Clear Radius2:2.29 mm; G2 - Heat Generation Factor (Rib-Roller End):13.3; |
Komatsu CAP DK133510-3500 CAP | Static load, C0:71 kN; Nlim (oil):8,400 rpm; D:100 mm; Da max:92 mm; Nlim (grease):7,200 rpm; Characteristic rolling element frequency, BSF:4.98 Hz; Fatigue limit load, Cu:8.7 kN; F:58.5 mm; r1s min:1.5 mm; Inventory:0.0; |
Komatsu CAP 17A-71-51810 CAP | Static load, C0:71 kN; Nlim (oil):8,400 rpm; D:100 mm; Da max:92 mm; Nlim (grease):7,200 rpm; Characteristic rolling element frequency, BSF:4.98 Hz; Fatigue limit load, Cu:8.7 kN; F:58.5 mm; r1s min:1.5 mm; Inventory:0.0; |