Komatsu CAP 56B-27-19510 CAP	Static load, C0:71 kN; Nlim (oil):8,400 rpm; D:100 mm; Da max:92 mm; Nlim (grease):7,200 rpm; Characteristic rolling element frequency, BSF:4.98 Hz; Fatigue limit load, Cu:8.7 kN; F:58.5 mm; r1s min:1.5 mm; Inventory:0.0;
Komatsu CAP 707-88-04740 CAP	Housing Width A:46.8 mm; Bolt Hole Size N:17.1 mm; Center of Bearing from Housing End A2:1.242 mm; e:0.105 in; Total Length H:215.9 mm; Inside Ring Outside Diameter:2.980 in; Housing Style:Two-Bolt Flange; Total Height L:127 mm; Series:Industrial; Flange Thickness A1:16.7 mm;
Komatsu CAP 415-979-1111 CAP	Holder Surface Treatment:Black Oxide Coating; Flange Shape:Round Type; Bearing I.D. d(mm):10; Number of Bearings:Double; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Shape:Flanged Pilot Type; Bearing Retained:No; Days to Ship:8 Days or more;
Komatsu CAP YM172964-14301 CAP	Y1 - Geometry Factor:3.14; Dimension L Fix:3.87 in; Dimension SA:3.62 in; Shaft Tolerance:0.0020 in; Dimension H:0.94 in; Dimension N:2.930 in; Dimension BC:7.88 in; Dimension F:9.5 in; Dimension C:4.5000 in; Locking Style:Single Concentric;
Komatsu CAP 208-60-75280 CAP ASS'Y	Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Height Indication:Height Selection; Days to Ship:8 Days; Height H(mm):25 ～ 40; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Bearing Part Number:6901; Number of Bearings:Single; Holder Surface Treatment:Black Oxide Coating;
Komatsu CAP 23D-22-11450 CAP	B:22 mm; Recommended tightening torque for set screw:3.5 Nm; e:15 mm; L:57 mm; s1:11 mm; N:12mm; G:M6x1; H:99 mm; C:9.55 kN; Z:22.5 mm;
Komatsu CAP 198-71-31250 CAP	Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Height Indication:Height Selection; Days to Ship:8 Days; Height H(mm):25 ～ 40; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Bearing Part Number:6901; Number of Bearings:Single; Holder Surface Treatment:Black Oxide Coating;
Komatsu CAP 708-1L-04150 CAP ASS'Y	Static load, C0:71 kN; Nlim (oil):8,400 rpm; D:100 mm; Da max:92 mm; Nlim (grease):7,200 rpm; Characteristic rolling element frequency, BSF:4.98 Hz; Fatigue limit load, Cu:8.7 kN; F:58.5 mm; r1s min:1.5 mm; Inventory:0.0;