Komatsu COIL 795-471-1800 REMOVER	Da max:57 mm; Fatigue limit load, Cu:0.66 kN; B:16 mm; da max:38.8 mm; Static load, C0:11.3 kN; Min operating temperature, Tmin:-40 °C; Nref:12,000 rpm; Nlim:18,000 rpm; f0:13.8; Characteristic inner ring frequency, BPFI:5.42 Hz;
Komatsu COIL NJ22433-L1611KF COIL	d:45 mm; L:190 mm; N:17mm; L1:62 mm; C:31.85 kN; S:19 mm; T max.:100 °C; J:146 mm; A1:36 mm; G:M6x1;
Komatsu COIL 208-98-31211 GREASE GUN	e:31 mm; J:202 mm; A1:16 mm; T min.:-20 °C; d1:82 mm; A2:68.3 mm; s1:39 mm; A:50.4 mm; Recommended tightening torque for set screw:22 Nm; Designation of housing:FLE212-;
Komatsu COIL 21P-60-K3070 CONTROL	rs min:1 mm; ra max:1 mm; Radial clearance class:CN; D:80 mm; B:16 mm; d:50 mm; Nlim (grease):8,400 rpm; Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; f0:15.5;
Komatsu COIL 23B-30-31212 RIM	Da max:57 mm; Fatigue limit load, Cu:0.66 kN; B:16 mm; da max:38.8 mm; Static load, C0:11.3 kN; Min operating temperature, Tmin:-40 °C; Nref:12,000 rpm; Nlim:18,000 rpm; f0:13.8; Characteristic inner ring frequency, BPFI:5.42 Hz;
Komatsu COIL KD0-35120-0528 FIELD COIL ASS'	B:7.94 mm; Brand:NTN; d:12.7 mm; rs min:0.4 mm; Nlim (grease):26,000 rpm; Dynamic load, C:5.1 kN; Radial clearance class:CN; da min:15.3 mm; Min operating temperature, Tmin:-25 °C; D:28.58 mm;
Komatsu COIL 424-30-32111 RIM	Y1 - Geometry Factor:2.74; Eng Internal Radial Clearance - Min:0.0030; Pre Install Clearance Min:0.0030 in; Dimension N:2.560 in; Dimension C:4.9 in; Oil Lubrication - B/C/O Seal:1800 rpm; Y2 - Geometry Factor:4.08; Weight:11.0 lb; Dimension BC:9.45 in; Dimension G:1 in;
Komatsu COIL MK059-012 CONTROL	Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Part Number:6906; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Seals:VV (Non-Contact Rubb; Bearing Material:[Steel] Steel; Width T(mm):50; Flange O.D. H(φ):88;