Komatsu COIL UCR902196564 CONTROL	Da max:57 mm; Fatigue limit load, Cu:0.66 kN; B:16 mm; da max:38.8 mm; Static load, C0:11.3 kN; Min operating temperature, Tmin:-40 °C; Nref:12,000 rpm; Nlim:18,000 rpm; f0:13.8; Characteristic inner ring frequency, BPFI:5.42 Hz;
Komatsu COIL 234-30-22311 RIM	Y1 - Geometry Factor:2.74; Eng Internal Radial Clearance - Min:0.0030; Pre Install Clearance Min:0.0030 in; Dimension N:2.560 in; Dimension C:4.9 in; Oil Lubrication - B/C/O Seal:1800 rpm; Y2 - Geometry Factor:4.08; Weight:11.0 lb; Dimension BC:9.45 in; Dimension G:1 in;
Komatsu COIL 23B-30-71110 RIM	Stroke:No; Fit:J7; Unit Body Material:Cast Iron; Surface Treatment:No; Bearing Inner Dia. Shape:Tapered hole adapter; Diameter series symbol:Used for Light load; Unit, Type:Insert Bearing Unit; Grease Type:SH44M;
Komatsu COIL 20G-60-K4610 CONTROL	D:12.25 in; e - ISO Factor2:0.73; r - Cup Backface To Clear Radius1:0.250 in; C - Cup Width:2.2500 in; Cg - Geometry Factor:0.133; Cup Part Number:HH932115; Y - ISO Factor3:0.82; Da - Cup Frontface Backing Diameter:11.36 in; Series:HH932100; Design Units:Imperial;
Komatsu COIL 515-30-21810 RIM	B:7.94 mm; Brand:NTN; d:12.7 mm; rs min:0.4 mm; Nlim (grease):26,000 rpm; Dynamic load, C:5.1 kN; Radial clearance class:CN; da min:15.3 mm; Min operating temperature, Tmin:-25 °C; D:28.58 mm;
Komatsu COIL 21P-60-K3070 CONTROL	G:M6x1; Designation of housing:F213-; d:65 mm; B:65.1 mm; S:25.4 mm; A2:69.7 mm; A1:22 mm; T max.:200 °C; Designation of bearing:UC213G2T20; L:187 mm;
Komatsu COIL WE29313D COIL	B:7.94 mm; Brand:NTN; d:12.7 mm; rs min:0.4 mm; Nlim (grease):26,000 rpm; Dynamic load, C:5.1 kN; Radial clearance class:CN; da min:15.3 mm; Min operating temperature, Tmin:-25 °C; D:28.58 mm;
Komatsu COIL 21T-68-31180 GREASE	D:12.25 in; e - ISO Factor2:0.73; r - Cup Backface To Clear Radius1:0.250 in; C - Cup Width:2.2500 in; Cg - Geometry Factor:0.133; Cup Part Number:HH932115; Y - ISO Factor3:0.82; Da - Cup Frontface Backing Diameter:11.36 in; Series:HH932100; Design Units:Imperial;