Komatsu COIL YM172527-67850 TRIM	Y1 - Geometry Factor:2.74; Eng Internal Radial Clearance - Min:0.0030; Pre Install Clearance Min:0.0030 in; Dimension N:2.560 in; Dimension C:4.9 in; Oil Lubrication - B/C/O Seal:1800 rpm; Y2 - Geometry Factor:4.08; Weight:11.0 lb; Dimension BC:9.45 in; Dimension G:1 in;
Komatsu COIL 424-30-41510 RIM	G:M6x1; Designation of housing:F213-; d:65 mm; B:65.1 mm; S:25.4 mm; A2:69.7 mm; A1:22 mm; T max.:200 °C; Designation of bearing:UC213G2T20; L:187 mm;
Komatsu COIL 3EC-27-14332KF RIM	e:31 mm; J:202 mm; A1:16 mm; T min.:-20 °C; d1:82 mm; A2:68.3 mm; s1:39 mm; A:50.4 mm; Recommended tightening torque for set screw:22 Nm; Designation of housing:FLE212-;
Komatsu COIL 427-12-11872 GREASE	B:7.94 mm; Brand:NTN; d:12.7 mm; rs min:0.4 mm; Nlim (grease):26,000 rpm; Dynamic load, C:5.1 kN; Radial clearance class:CN; da min:15.3 mm; Min operating temperature, Tmin:-25 °C; D:28.58 mm;
Komatsu COIL 795-471-1700 REMOVER	D:12.25 in; e - ISO Factor2:0.73; r - Cup Backface To Clear Radius1:0.250 in; C - Cup Width:2.2500 in; Cg - Geometry Factor:0.133; Cup Part Number:HH932115; Y - ISO Factor3:0.82; Da - Cup Frontface Backing Diameter:11.36 in; Series:HH932100; Design Units:Imperial;
Komatsu COIL WE29313D COIL	e:31 mm; J:202 mm; A1:16 mm; T min.:-20 °C; d1:82 mm; A2:68.3 mm; s1:39 mm; A:50.4 mm; Recommended tightening torque for set screw:22 Nm; Designation of housing:FLE212-;
Komatsu COIL G44A717067-001KF CONTROL	Y1 - Geometry Factor:2.74; Eng Internal Radial Clearance - Min:0.0030; Pre Install Clearance Min:0.0030 in; Dimension N:2.560 in; Dimension C:4.9 in; Oil Lubrication - B/C/O Seal:1800 rpm; Y2 - Geometry Factor:4.08; Weight:11.0 lb; Dimension BC:9.45 in; Dimension G:1 in;
Komatsu COIL CA0134126 COIL	e:31 mm; J:202 mm; A1:16 mm; T min.:-20 °C; d1:82 mm; A2:68.3 mm; s1:39 mm; A:50.4 mm; Recommended tightening torque for set screw:22 Nm; Designation of housing:FLE212-;