| Komatsu COIL 234-30-81110 RIM | rs min:1 mm; ra max:1 mm; Radial clearance class:CN; D:80 mm; B:16 mm; d:50 mm; Nlim (grease):8,400 rpm; Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; f0:15.5; |
| Komatsu COIL 423-30-62210 RIM | D:12.25 in; e - ISO Factor2:0.73; r - Cup Backface To Clear Radius1:0.250 in; C - Cup Width:2.2500 in; Cg - Geometry Factor:0.133; Cup Part Number:HH932115; Y - ISO Factor3:0.82; Da - Cup Frontface Backing Diameter:11.36 in; Series:HH932100; Design Units:Imperial; |
| Komatsu COIL WE29313D COIL | Stroke:No; Fit:J7; Unit Body Material:Cast Iron; Surface Treatment:No; Bearing Inner Dia. Shape:Tapered hole adapter; Diameter series symbol:Used for Light load; Unit, Type:Insert Bearing Unit; Grease Type:SH44M; |
| Komatsu COIL 427-12-11872 GREASE | Y1 - Geometry Factor:2.74; Eng Internal Radial Clearance - Min:0.0030; Pre Install Clearance Min:0.0030 in; Dimension N:2.560 in; Dimension C:4.9 in; Oil Lubrication - B/C/O Seal:1800 rpm; Y2 - Geometry Factor:4.08; Weight:11.0 lb; Dimension BC:9.45 in; Dimension G:1 in; |
| Komatsu COIL 569-98-71110 GREASE | Da max:57 mm; Fatigue limit load, Cu:0.66 kN; B:16 mm; da max:38.8 mm; Static load, C0:11.3 kN; Min operating temperature, Tmin:-40 °C; Nref:12,000 rpm; Nlim:18,000 rpm; f0:13.8; Characteristic inner ring frequency, BPFI:5.42 Hz; |
| Komatsu COIL 795-471-1600 REMOVER | Cage Material:Brass; C0 - Static Radial Rating:5120000 N; e - ISO Factor3:0.3; R - Inner Ring To Clear Radius1:4.000 mm; Bearing Weight:128.700 Kg; Cg - Geometry Factor8:0.1267; B - Outer Ring Width:160.000 mm; Cage Type:YMB; d:300.000 mm; Reference Thermal Speed Rating (Grease):680; |
| Komatsu COIL NJ22433-FJ10DKF COIL | e:31 mm; J:202 mm; A1:16 mm; T min.:-20 °C; d1:82 mm; A2:68.3 mm; s1:39 mm; A:50.4 mm; Recommended tightening torque for set screw:22 Nm; Designation of housing:FLE212-; |
| Komatsu COIL 421-W40-1110 RIM | D:12.25 in; e - ISO Factor2:0.73; r - Cup Backface To Clear Radius1:0.250 in; C - Cup Width:2.2500 in; Cg - Geometry Factor:0.133; Cup Part Number:HH932115; Y - ISO Factor3:0.82; Da - Cup Frontface Backing Diameter:11.36 in; Series:HH932100; Design Units:Imperial; |