Komatsu 9BELLCRANK 3SB-84-61160UCKF 9BELLCRANK	Seals:DD (Contact Rubber S; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Shape:L-Shaped; RoHS:6; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Height Indication:Height Selection; Height H(mm):30 ～ 50; Type:Bearings with Housin;
Komatsu 9BELLCRANK 418-T80-2210 BELLCRANK	Seals:DD (Contact Rubber S; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Shape:L-Shaped; RoHS:6; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Height Indication:Height Selection; Height H(mm):30 ～ 50; Type:Bearings with Housin;
Komatsu 9BELLCRANK "207-54-K1730 Portal assembly	Basic Load Rating Cor (Static)(N):418; Volume Discount:Available; Inner/Outer Ring Material:440C Stainless Steel; Bearing Style:Double Shielded; Rolling Element Material:440C Stainless Steel; Outer Ring Shape:Standard; Width B (or T)(mm):5;
Komatsu 9BELLCRANK 41H-70-11133 BELLCRANK	da min:86 mm; Fatigue limit load, Cu:3.25 kN; Inch - Metric:Metric; Outside Diameter:6.299 Inch | 160 Mil; f0:13.2; Max operating temperature, Tmax:110 °C; Inventory:0.0; Characteristic outer ring frequency, BPF0:3.08 Hz; Category:Single Row Ball Bear; Da max:149 mm;
Komatsu 9BELLCRANK "	Grease Type:SH44M; Bearing Unit, Type:Take-Up Type; Surface Treatment:No; Machining:No; Fit:J7; Stroke:No; Basic Load Rating, Static Rating(N):29500; Bearing Inner Dia. Shape:Tapered hole adapter;
Komatsu 9BELLCRANK "	A1:20 mm; Designation of housing:FA212-; T min.:-20 °C; B1:77.7 mm; d1:82 mm; J1:92 mm; Weight:4.73 kg; e:29 mm; G:M6x1; Recommended tightening torque for set screw:16.8 Nm;
Komatsu 9BELLCRANK "	Seals:DD (Contact Rubber S; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Shape:L-Shaped; RoHS:6; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Height Indication:Height Selection; Height H(mm):30 ～ 50; Type:Bearings with Housin;
Komatsu 9BELLCRANK 418-T80-2210 BELLCRANK	s1:36.3 mm; N1:21 mm; Weight:2.41 kg; d:34.92 mm; C0:15.2 kN; J:127 mm; L1:56 mm; Recommended tightening torque for set screw:8 Nm; L:167 mm; B1:51.1 mm;