| Komatsu 9BELLCRANK " | s1:36.3 mm; N1:21 mm; Weight:2.41 kg; d:34.92 mm; C0:15.2 kN; J:127 mm; L1:56 mm; Recommended tightening torque for set screw:8 Nm; L:167 mm; B1:51.1 mm; |
| Komatsu 9BELLCRANK 41G-70-00040 BELLCRANK | da min:86 mm; Fatigue limit load, Cu:3.25 kN; Inch - Metric:Metric; Outside Diameter:6.299 Inch | 160 Mil; f0:13.2; Max operating temperature, Tmax:110 °C; Inventory:0.0; Characteristic outer ring frequency, BPF0:3.08 Hz; Category:Single Row Ball Bear; Da max:149 mm; |
| Komatsu 9BELLCRANK " | A1:20 mm; Designation of housing:FA212-; T min.:-20 °C; B1:77.7 mm; d1:82 mm; J1:92 mm; Weight:4.73 kg; e:29 mm; G:M6x1; Recommended tightening torque for set screw:16.8 Nm; |
| Komatsu 9BELLCRANK " | Grease Type:SH44M; Bearing Unit, Type:Take-Up Type; Surface Treatment:No; Machining:No; Fit:J7; Stroke:No; Basic Load Rating, Static Rating(N):29500; Bearing Inner Dia. Shape:Tapered hole adapter; |
| Komatsu 9BELLCRANK 416-70-31213 BELLCRANK | Bearing Retained:No; Flange Shape:Round Type; Width T(mm):25 ～ 35; Bearing Part Number:626; Days to Ship:7 Days; Shape:Flange Type; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; |
| Komatsu 9BELLCRANK 417-70-21140 BELLCRANK | s1:36.3 mm; N1:21 mm; Weight:2.41 kg; d:34.92 mm; C0:15.2 kN; J:127 mm; L1:56 mm; Recommended tightening torque for set screw:8 Nm; L:167 mm; B1:51.1 mm; |
| Komatsu 9BELLCRANK 3EH-24-21310SAKF 9BELLCRANK | da min:86 mm; Fatigue limit load, Cu:3.25 kN; Inch - Metric:Metric; Outside Diameter:6.299 Inch | 160 Mil; f0:13.2; Max operating temperature, Tmax:110 °C; Inventory:0.0; Characteristic outer ring frequency, BPF0:3.08 Hz; Category:Single Row Ball Bear; Da max:149 mm; |
| Komatsu 9BELLCRANK " | Machining:Oil-free type; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Pillow Type, Category:Standard; Seal:Nitrile; Basic Load Rating, Static Rating(N):71500; Fit:J7; B:101.6; Basic Load Rating, Dynamic Rating(N):96100; |