Komatsu piston 232-63-63270 piston | G2 - Heat Generation Factor (Rib-Roller End):171; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:105000 lbf; a - Effective Center Location4:-0.02 in; Cone Part Number:H852849; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:714000 lbf; Aa - Cage-Cone Backface Clearance:0.71 in; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):2250; db - Cone Backface Backing Diameter:12.4 in; |
Komatsu piston 195-15-12731 piston | Nlim (grease):4,800 rpm; Characteristic cage frequency, FTF:0.45 Hz; Static load, C0:33.5 kN; Dynamic load, C:33.5 kN; Characteristic inner ring frequency, BPFI:10.37 Hz; Min operating temperature, Tmin:-20 °C; Da max:123.5 mm; Radial clearance class:CN; d:95 mm; Brand:NTN; |
Komatsu piston 707-36-80080 piston | Designation of housing:PAE204N-; H:33.3 mm; C0:6.65 kN; H1:9 mm; C:12.8 kN; J:50.8 mm; H2:64 mm; G:R1/8"; T min.:-20 °C; Designation of bearing:EX201G2L3; |
Komatsu piston 195-30-14190 piston | S:9 mm; H2:79.5 mm; L:161.5 mm; T max.:200 °C; Designation of bearing:ES206-18G2T20; Designation of housing:PLE206-; H1:14.5 mm; J:119 mm; N1:24.5 mm; Recommended tightening torque for set screw:8 Nm; |
Komatsu piston 154-33-21210 piston | C0:11.5 kN; A:36 mm; Weight:1.25 kg; s1:19 mm; L:122 mm; L1:76 mm; G:M6x1; Recommended tightening torque for set screw:3.7 Nm; S:15 mm; SW:3.18 mm; |
Komatsu piston 707-36-80920 piston | Surface Treatment:No; Basic Load Rating, Static Rating(N):53000; Stroke:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; d:80; Fit:J7; Unit, Type:Insert Bearing Unit; Machining:Cast iron cover moun; RoHS:6; |
Komatsu piston 707-36-90911 piston | Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Stroke:No; RoHS:6; Rolling Element Material:Bearing Steel; Fit:J7; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):96100; Seal:Silicone; Days to Ship:8 Days; |
Komatsu piston 707-36-95170 piston | C0:11.5 kN; A:36 mm; Weight:1.25 kg; s1:19 mm; L:122 mm; L1:76 mm; G:M6x1; Recommended tightening torque for set screw:3.7 Nm; S:15 mm; SW:3.18 mm; |