Komatsu ring 3EH-63-11160KF ring	Pillow/Plummer Block Style:Split Cylindrical Ho; Shaft Size:55 mm; Dimension J:10.6 in; Seal Type:Aluminium Triple Lab; Dimension L:13.0 in; Support Type:Two-Bolt Plummer Blo; Weight:47 lb; Dimension H1:1.5 in; Bolt Size:2 x M20; Cor - Static Load Rating:42714 lbf;
Komatsu ring 21S-25-31101 ring	A:48 mm; Designation of bearing:UC206-19G2; E:18 mm; H:42.9 mm; T max.:100 °C; Designation of housing:PG206-; N:M10; s1:19.05 mm; C0:11.2 kN; Weight:1.11 kg;
Komatsu ring 418-63-K1250 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 566-88-71522 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring MK535-019 ring	Shaft Size  :2-11/16 in; Eng Internal Radial Clearance - Min:0.0037; Y1 - Geometry Factor:2.90; Oil Lubrication - T Seal:2400 rpm; Grease Lubrication - M/N Seal:1400 rpm; Oil Lubrication - M/N Seal:1400 rpm; Eng Internal Radial Clearance - Max:0.0047; e - Geometry Factor:0.23; Grease Lubrication - T Seal:2000 rpm; Engineering Group:Mounted Bearing;
Komatsu ring 17A-15-22620 ring	C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm;
Komatsu ring 6623-31-1371 ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;
Komatsu ring 104-15-22650 ring	C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm;