Komatsu ring 135-15-22650 ring	Bearing Weight:5.1 Kg; B:58.000 mm; a - Effective Center Location3:-17.3 mm; Cone Part Number:X32315M; G1 - Heat Generation Factor (Roller-Raceway):145.2; K - Factor7:1.69; G2 - Heat Generation Factor (Rib-Roller End):26.7; C1 - Dynamic Radial Rating (1 million revolutions)5:357000 N; Cup Part Number:Y32315M; Ab - Cage-Cone Frontface Clearance:1.5 mm;
Komatsu ring 56C-46-13823 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 707-71-31690 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 8233-72-3520 ring	H2:102 mm; G:M6x1; Weight:3.87 kg; C:43.55 kN; L3:95 mm; T max.:100 °C; Designation of housing:T211N-; H1:130 mm; s1:27.8 mm; A2:38 mm;
Komatsu ring 426-30-12151 ring	Shaft Size  :2-11/16 in; Eng Internal Radial Clearance - Min:0.0037; Y1 - Geometry Factor:2.90; Oil Lubrication - T Seal:2400 rpm; Grease Lubrication - M/N Seal:1400 rpm; Oil Lubrication - M/N Seal:1400 rpm; Eng Internal Radial Clearance - Max:0.0047; e - Geometry Factor:0.23; Grease Lubrication - T Seal:2000 rpm; Engineering Group:Mounted Bearing;
Komatsu ring 56C-46-13823 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 42C-30-12290 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 418-63-K1250 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;