Komatsu ring 206-63-K1660 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 104-15-22610 ring	H2:102 mm; G:M6x1; Weight:3.87 kg; C:43.55 kN; L3:95 mm; T max.:100 °C; Designation of housing:T211N-; H1:130 mm; s1:27.8 mm; A2:38 mm;
Komatsu ring 135-15-22650 ring	Bearing Weight:5.1 Kg; B:58.000 mm; a - Effective Center Location3:-17.3 mm; Cone Part Number:X32315M; G1 - Heat Generation Factor (Roller-Raceway):145.2; K - Factor7:1.69; G2 - Heat Generation Factor (Rib-Roller End):26.7; C1 - Dynamic Radial Rating (1 million revolutions)5:357000 N; Cup Part Number:Y32315M; Ab - Cage-Cone Frontface Clearance:1.5 mm;
Komatsu ring 208-01-11221CL ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 104-15-22610 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 42C-33-11930 ring	Machining:No; Stroke:No; RoHS:6; Days to Ship:8 Days; Seal:Silicone; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Surface Treatment:No; Pillow Type, Category:Standard;
Komatsu ring 20Y-30-16162 ring	A:48 mm; Designation of bearing:UC206-19G2; E:18 mm; H:42.9 mm; T max.:100 °C; Designation of housing:PG206-; N:M10; s1:19.05 mm; C0:11.2 kN; Weight:1.11 kg;
Komatsu ring 566-81-14111CL ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;