Komatsu ring 423-15-12630 ring	Y1 - ISO Factor5:2.82; C1(2) - Dynamic Radial Rating (Two-Rows):15700000 N; D:1090.000 mm; Da - Outer Ring Backing Diameter:996.000 mm; Cage Type:YMD; B - Inner Ring Width:412 mm; R - Inner Ring To Clear Radius1:6.000 mm; B - Outer Ring Width:412.000 mm; Bore Taper:1/30; UPC Code:087796141896;
Komatsu ring 235-70-15740 ring	Pillow/Plummer Block Style:Split Cylindrical Ho; Shaft Size:55 mm; Dimension J:10.6 in; Seal Type:Aluminium Triple Lab; Dimension L:13.0 in; Support Type:Two-Bolt Plummer Blo; Weight:47 lb; Dimension H1:1.5 in; Bolt Size:2 x M20; Cor - Static Load Rating:42714 lbf;
Komatsu ring 232-27-11740 ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;
Komatsu ring 175-15-42632 ring	Shaft Size  :2-11/16 in; Eng Internal Radial Clearance - Min:0.0037; Y1 - Geometry Factor:2.90; Oil Lubrication - T Seal:2400 rpm; Grease Lubrication - M/N Seal:1400 rpm; Oil Lubrication - M/N Seal:1400 rpm; Eng Internal Radial Clearance - Max:0.0047; e - Geometry Factor:0.23; Grease Lubrication - T Seal:2000 rpm; Engineering Group:Mounted Bearing;
Komatsu ring 207-30-56162 ring	Seal Type:Narrow Shroud; Inside Ring Outside Diameter:1.579 in; Bearing Type:Ball Bearing; Total Length H:141.3 mm; Housing Width A:0.843 in; Center of Bearing from Bearing End S:11.1 mm; Inside Ring Width B:32.5 mm; Shaft Size d:1 1/8 in; Dynamic Load Rating:4850 lbf; Housing Style:Two-Bolt Flange;
Komatsu ring 707-51-16810 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 103-15-22620 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 195-30-16144E ring	C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm;