Komatsu ring 233-30-12220 ring | Housing Material:304 Stainless Steel; Width T(mm):35; Flange O.D. H(φ):59; Holder Surface Treatment:Not Provided; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Volume Discount:Available; Bearing I.D. d(mm):15; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; |
Komatsu ring 707-71-32780 ring | A:48 mm; Designation of bearing:UC206-19G2; E:18 mm; H:42.9 mm; T max.:100 °C; Designation of housing:PG206-; N:M10; s1:19.05 mm; C0:11.2 kN; Weight:1.11 kg; |
Komatsu ring 707-71-11250 ring | C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm; |
Komatsu ring 6202-31-4180 ring | A:48 mm; Designation of bearing:UC206-19G2; E:18 mm; H:42.9 mm; T max.:100 °C; Designation of housing:PG206-; N:M10; s1:19.05 mm; C0:11.2 kN; Weight:1.11 kg; |
Komatsu ring 195-27-12252 ring | Shaft Size :2-11/16 in; Eng Internal Radial Clearance - Min:0.0037; Y1 - Geometry Factor:2.90; Oil Lubrication - T Seal:2400 rpm; Grease Lubrication - M/N Seal:1400 rpm; Oil Lubrication - M/N Seal:1400 rpm; Eng Internal Radial Clearance - Max:0.0047; e - Geometry Factor:0.23; Grease Lubrication - T Seal:2000 rpm; Engineering Group:Mounted Bearing; |
Komatsu ring 425-15-12850 ring | G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm; |
Komatsu ring 42C-70-11642 ring | Machining:No; Stroke:No; RoHS:6; Days to Ship:8 Days; Seal:Silicone; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Surface Treatment:No; Pillow Type, Category:Standard; |
Komatsu ring 425-30-21131 ring | H2:102 mm; G:M6x1; Weight:3.87 kg; C:43.55 kN; L3:95 mm; T max.:100 °C; Designation of housing:T211N-; H1:130 mm; s1:27.8 mm; A2:38 mm; |