Komatsu ring 796-667-1310 ring | Y1 - ISO Factor5:2.82; C1(2) - Dynamic Radial Rating (Two-Rows):15700000 N; D:1090.000 mm; Da - Outer Ring Backing Diameter:996.000 mm; Cage Type:YMD; B - Inner Ring Width:412 mm; R - Inner Ring To Clear Radius1:6.000 mm; B - Outer Ring Width:412.000 mm; Bore Taper:1/30; UPC Code:087796141896; |
Komatsu ring 198-30-56241 ring | Machining:No; Stroke:No; RoHS:6; Days to Ship:8 Days; Seal:Silicone; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Surface Treatment:No; Pillow Type, Category:Standard; |
Komatsu ring 21P-60-K3180 ring | Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in; |
Komatsu ring 21W-26-41150 ring | C90 - Dynamic Radial Rating (90 million revolutions)4:68100 lbf; r - Cup Backface To Clear Radius2:3.30 mm; R - Cone Backface To Clear Radius1:9.650 mm; C - Cup Width:63.500 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:46800 lbf; G2 - Heat Generation Factor (Rib-Roller End):128.2; d:165.1 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:263000 lbf; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):1150.5; |
Komatsu ring 707-71-31550 ring | A:48 mm; Designation of bearing:UC206-19G2; E:18 mm; H:42.9 mm; T max.:100 °C; Designation of housing:PG206-; N:M10; s1:19.05 mm; C0:11.2 kN; Weight:1.11 kg; |
Komatsu ring 235-30-00220 ring | Y1 - ISO Factor5:2.82; C1(2) - Dynamic Radial Rating (Two-Rows):15700000 N; D:1090.000 mm; Da - Outer Ring Backing Diameter:996.000 mm; Cage Type:YMD; B - Inner Ring Width:412 mm; R - Inner Ring To Clear Radius1:6.000 mm; B - Outer Ring Width:412.000 mm; Bore Taper:1/30; UPC Code:087796141896; |
Komatsu ring 195-30-62410 ring | C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm; |
Komatsu ring 150-27-00028 ring | Y1 - ISO Factor5:2.82; C1(2) - Dynamic Radial Rating (Two-Rows):15700000 N; D:1090.000 mm; Da - Outer Ring Backing Diameter:996.000 mm; Cage Type:YMD; B - Inner Ring Width:412 mm; R - Inner Ring To Clear Radius1:6.000 mm; B - Outer Ring Width:412.000 mm; Bore Taper:1/30; UPC Code:087796141896; |