Komatsu ring 209-27-00180 ring	C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm;
Komatsu ring 20E-60-K2090 ring	H2:102 mm; G:M6x1; Weight:3.87 kg; C:43.55 kN; L3:95 mm; T max.:100 °C; Designation of housing:T211N-; H1:130 mm; s1:27.8 mm; A2:38 mm;
Komatsu ring 707-71-31780 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 14X-15-12661 ring	H2:102 mm; G:M6x1; Weight:3.87 kg; C:43.55 kN; L3:95 mm; T max.:100 °C; Designation of housing:T211N-; H1:130 mm; s1:27.8 mm; A2:38 mm;
Komatsu ring 42C-33-11750 ring	Y1 - ISO Factor5:2.82; C1(2) - Dynamic Radial Rating (Two-Rows):15700000 N; D:1090.000 mm; Da - Outer Ring Backing Diameter:996.000 mm; Cage Type:YMD; B - Inner Ring Width:412 mm; R - Inner Ring To Clear Radius1:6.000 mm; B - Outer Ring Width:412.000 mm; Bore Taper:1/30; UPC Code:087796141896;
Komatsu ring 234-30-22720 ring	Shaft Size  :2-11/16 in; Eng Internal Radial Clearance - Min:0.0037; Y1 - Geometry Factor:2.90; Oil Lubrication - T Seal:2400 rpm; Grease Lubrication - M/N Seal:1400 rpm; Oil Lubrication - M/N Seal:1400 rpm; Eng Internal Radial Clearance - Max:0.0047; e - Geometry Factor:0.23; Grease Lubrication - T Seal:2000 rpm; Engineering Group:Mounted Bearing;
Komatsu ring STAD0884A ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;
Komatsu ring 198-30-62320 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;