Komatsu ring 23S-65-21350 ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;
Komatsu ring 562-15-22621 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 561-30-11530 ring	Shaft Size  :2-11/16 in; Eng Internal Radial Clearance - Min:0.0037; Y1 - Geometry Factor:2.90; Oil Lubrication - T Seal:2400 rpm; Grease Lubrication - M/N Seal:1400 rpm; Oil Lubrication - M/N Seal:1400 rpm; Eng Internal Radial Clearance - Max:0.0047; e - Geometry Factor:0.23; Grease Lubrication - T Seal:2000 rpm; Engineering Group:Mounted Bearing;
Komatsu ring 561-15-42280 ring	Seal Type:Narrow Shroud; Inside Ring Outside Diameter:1.579 in; Bearing Type:Ball Bearing; Total Length H:141.3 mm; Housing Width A:0.843 in; Center of Bearing from Bearing End S:11.1 mm; Inside Ring Width B:32.5 mm; Shaft Size d:1 1/8 in; Dynamic Load Rating:4850 lbf; Housing Style:Two-Bolt Flange;
Komatsu ring 423-15-12663 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 569-30-62110 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 3EE-27-15320KF ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;
Komatsu ring 21M-30-15130 ring	A:48 mm; Designation of bearing:UC206-19G2; E:18 mm; H:42.9 mm; T max.:100 °C; Designation of housing:PG206-; N:M10; s1:19.05 mm; C0:11.2 kN; Weight:1.11 kg;